Chris7
|
| posted on 23/11/03 at 07:58 PM |
|
|
Exhaust
Hi
Everyone got the little beauty running first time now i need to get a proper exhaust for it the one is was looking at was the one from tiger cars off
the shelf and not only that but they did the one for z-cars..
anybody bought one of these
for ZX9-C
Thanks Chris B
|
|
|
|
|
lococost
|
| posted on 23/11/03 at 09:52 PM |
|
|
I heard one running with cat on a GSXR1000 B6 and it was awefully loud, I think it topped out at 106db at SVA. Still, it looked very good and if you
want to show off, I guess it's the one to have, the sound is spectacular.
I'm sticking to the original damper that came with the engine and should be -according to the writing on the back of the damper- 80db.
groeten,
lococost.
|
|
|
MK9R
|
| posted on 24/11/03 at 10:19 AM |
|
|
I bought the manifold and collector from them to go on my MK. It wasn't straight forward as it exited the car differently than the tiger and
the triangulation fouled the manifold. You can read about my fun and games on my website. It took a lot of messing around to get it right, but apart
from getting one made (very expensive) i think is the best option. You could always try the ST one i suppose, although i don't like the look of
it personally.
Cheers Austen
RGB car number 9
www.austengreenway.co.uk
www.automatedtechnologygroup.co.uk
www.trackace.co.uk
|
|
|
ChrisGamlin
|
| posted on 24/11/03 at 03:20 PM |
|
|
lococost, dont forget that unless you run the airbox too, you won't get anywhere near the 80db stated on your silencer due to the induction
noise. Even if you do use an airbox tho, I'd say you'll be lucky to hit those sort of figures. A BEC with a standard R1 baffled can is
around the 98-100db mark at 8krpm, albeit without airbox (which would probably drop it another 3-6db max)
Chris
|
|
|
lococost
|
| posted on 24/11/03 at 05:15 PM |
|
|
I know 80db probably wouldn't be possible, can't imagine it beiing that quiet, But should be a lot better than a standard straight trough
damper. I know there are a lot of guys using the original damper due to the noise so there should be some truth in it.
As for the airbox, I will try to keep the air filter below the bonnet using pipes, like super7cars does and if that works maybe even try to make my
own airbox.
I will have to make an issue out of this because it will need to pass Belgian MOT of 90db max.... Can probably fiddle with the exup valve as well to
get the noise down.
|
|
|
Jasper
|
| posted on 24/11/03 at 08:58 PM |
|
|
I bough the ST one and then built the engine mounts to suit so it was easy...
|
|
|
locoboy
|
| posted on 25/11/03 at 11:11 AM |
|
|
Does that mean that you have canted your engine over more or less than perfect to avoid chassis members etc with the downpipes?
Wouldnt that play havock with the engine oil if it isnt sat at the angle it was supposed to sit at in the bike?
ATB
Locoboy
|
|
|
Chris7
|
| posted on 1/12/03 at 11:37 AM |
|
|
EXHAUST
Been to look at the tiger exhaust at the weekend ok but not over impressed think i will have a look at the stuart talylor then make my descision .
Thanks Chris B
|
|
|
MK9R
|
| posted on 1/12/03 at 02:36 PM |
|
|
what did you not like about the tiger exhaust??
Cheers Austen
RGB car number 9
www.austengreenway.co.uk
www.automatedtechnologygroup.co.uk
www.trackace.co.uk
|
|
|
Chris7
|
| posted on 2/12/03 at 08:54 AM |
|
|
exhuast
emm
Nothing in particular just want to see what else is available the build was ok all tubes seemed to be the same length .
and i also dont like paying the vat man cash is much better
might have stumbled on a local man who can build the same thing will keep everybody posted .
Thanks Chris B
|
|
|
loafersmate
|
| posted on 3/12/03 at 08:23 AM |
|
|
Don't forget that MK do a nice stainless exhaust and they're just up the road from you!
Ben
|
|
|
MK9R
|
| posted on 3/12/03 at 08:27 AM |
|
|
not for a zx9 they don't
Cheers Austen
RGB car number 9
www.austengreenway.co.uk
www.automatedtechnologygroup.co.uk
www.trackace.co.uk
|
|
|
Alistair
|
| posted on 6/12/03 at 04:06 PM |
|
|
Try Tube Engineers Ltd. in Market Rasen.
www.tubebending.co.uk
They have experience of making exhaust systems for bike engined Indys.
|
|
|
gsand
|
| posted on 7/12/03 at 10:59 PM |
|
|
AARRGGHH!!
Sorry to be off topic, but Chris7 can you PLEASE PLEASE PLEASE write sentances! It makes it so much easier to read and it just pisses me off.
No offence intended.
[Edited on 7/12/03 by gsand]
4st Insanity
Maybee i should start wearing a Welding mask.....
|
|
|
Rorty
|
| posted on 8/12/03 at 04:28 AM |
|
|
None taken!
Cheers, Rorty.
"Faster than a speeding Pullet".
PLEASE DON'T U2U ME IF YOU WANT A QUICK RESPONSE. TRY EMAILING ME INSTEAD!
|
|
|
OX
|
| posted on 9/12/03 at 01:00 AM |
|
|
yip Tube Engineers Ltd. in Market Rasen have just made me an exhaust for my indy R1,am happy with the end result
photo in archive ,sorry about size
should get it started for the first time tomorrow woohoo
|
|
|
Alistair
|
| posted on 10/12/03 at 09:56 AM |
|
|
Ox, did you take your car to Tube Engineers for them to fit the exhaust to or did they have a R1 and Indy combination programmed into the computer
already?
What provision for the lambda sensor do you have on the exhaust?
|
|
|
OX
|
| posted on 10/12/03 at 01:46 PM |
|
|
i had to take the car to them. they have now made a jig for the ri indy exhaust and have loads of jigs for other engine types i only asked them to
make the exhaust with no provisdions for a lambda sensor,im gonna try and get away without using one but if i need to i can allways put one on,the
exhaust is loud but i will be fitting the stock R1 can and cat for the sva
|
|
|
chris.russell
|
| posted on 11/12/03 at 11:50 AM |
|
|
Ox, Hope you don't mind me asking but what was the damage for the exhaust? Did you also know if they make one for a ZX9
|
|
|
Mk-Ninja
|
| posted on 11/12/03 at 05:11 PM |
|
|
Chris
They dont do one for the ZX9R yet but I am taking my car over there this weekend so they can do mine. So I assume he will make a jig then.
Gordon
I'm sure I've got one, just don't know where I've put it
|
|
|
Chris7
|
| posted on 12/12/03 at 08:09 AM |
|
|
EXHUAST
Hi
If you can let me know when they have done it and what it looks like, I would hope they keep a jig for that engine,which will solve me a lot of
problems, dont suppose you have a number for them do you .
Thanks Chris B
|
|
|
Mk-Ninja
|
| posted on 12/12/03 at 08:53 AM |
|
|
Chris
You have U2U
I'm sure I've got one, just don't know where I've put it
|
|
|
Hellfire
|
| posted on 13/12/03 at 02:10 AM |
|
|
Is it just me or...
why does the fireblade circuit diagram not show any outputs for exhaust sensors and such... ie Lamda Sensor?
I'm a tad confused as to whether our bike needs a CAT or not as there seem's not to be any inputs into CDI for anything like this... HELP!
Our am I talking complete boolox
|
|
|
Hellfire
|
| posted on 13/12/03 at 05:41 PM |
|
|
Exhaust - beauty is only shine deep!
IMHO I think ours looks pretty neat. A stainless MK version... Mmmm
 
Rescued attachment PC070160.jpg
|
|
|
