bjw970s
|
| posted on 22/8/08 at 10:00 PM |
|
|
Fitting Acumen Gear indicator
Trying to fit an Acumen to a ST LOCOBLADE.
Using the Tacho feed, the speedo sensor from the fireblade engine. Car has no speedo so on the speedo sensor I am using a pos feed to one wire, one
to earth and one as the sensor output
It recognises neutral but doesn't want to learn - any thoughts?
(company said fit a 10K resistor in pos feed)
As someone else once said 'LOCOST my Ar**
|
|
|
|
|
Hellfire
|
| posted on 22/8/08 at 11:31 PM |
|
|
They are a bitch to get to work m8 when it goes well its fine but not many get them to work reliably with blade engines... 
Steve
Read this LINK
HIH
[Edited on 22-8-08 by Hellfire]
|
|
|
scotlad
|
| posted on 23/8/08 at 07:04 AM |
|
|
Oh dear good luck! I gave up with mine on an old Blade engine even after fitting the sensor kit supplied free from Acumen.......
Wonderous is our great blue ship that sails around the mighty sun, and joy to everyone that rides along!
|
|
|
