Board logo

p100 bits
serieslandy - 26/3/09 at 04:48 PM

I have access to a ford p100 that is being scrapped in the next couple of weeks, 1st gear is gone in the gearbox.
Is there anything worth keeping off the p100 that might come in useful? Or maybe as a spare?
also it's pinto powered so petrol.
I already have all the parts off a 1.8L pinto sierra that I bought.

[Edited on 26/3/09 by serieslandy]

aka Keith - 26/3/09 at 05:02 PM

U2U sent to you
cheers
Craig

blakep82 - 26/3/09 at 05:26 PM

if i hadn't just spent over £1000 on an axle that isn't quite right, but will be eventually... the back axles on those are quite useful

serieslandy - 26/3/09 at 05:41 PM

quote:
Originally posted by aka Keith
U2U sent to you
cheers
Craig

u2u ignored

24vseven - 26/3/09 at 06:11 PM

axle center and cwp if you want to sell them i would be interested

mangogrooveworkshop - 26/3/09 at 06:48 PM

gearbox to the stock car lads

serieslandy - 26/3/09 at 07:36 PM

quote:
Originally posted by 24vseven
axle center and cwp if you want to sell them i would be interested
CWP?? whats that?? As with selling its the father in laws so I will ask if he wants to sell the bits.

splitrivet - 26/3/09 at 07:45 PM

Bugger, you hunt for a P100 tailgate for ages then after you get fixed up !!!!
Could do with the front and rear indicators the front wing cross bit under the grill and the grill if they are any good.
U2U me how much you want for them.
Cheers,
Bob

serieslandy - 26/3/09 at 07:49 PM

quote:
Originally posted by splitrivet
Bugger, you hunt for a P100 tailgate for ages then after you get fixed up !!!!
Could do with the front and rear indicators the front wing cross bit under the grill and the grill if they are any good.
U2U me how much you want for them.
Cheers,
Bob
Forgot to add that it is a tipper so no rear and he is keeping the ram and bed.
not too sure about the grill and cross bit as it was a bit of a workhorse but again I will have a look for you. as with the indicators Ill have a look to see if they are any good.

[Edited on 26/3/09 by serieslandy]

24vseven - 26/3/09 at 10:35 PM

i have a grill if your



stuck cwp is crown wheel and pinion

mangogrooveworkshop - 9/7/11 at 07:52 AM

p100 bits going cheep

the gas man wants to get into his box on the wall at the house ....but it has a p100 sitting in front of it....
So it has to go as we need to clear out the junk


u2 u me