Board logo

Looking at an automatic 2.0l mondeo as a doner to mate to a type 9 box
danro - 13/1/19 at 10:54 PM

Are there any issues bolting 2.0 black top zetec that originally had an auto transmission to a type 9 gearbox.
I would be getting the whole car so all the bolt on bits could follow too.
I was just wondering if this was viable or I should only look at the manual options.....

Cheers chaps

[Edited on 13/1/19 by danro]

[Edited on 13/1/19 by danro]

loggyboy - 13/1/19 at 11:39 PM

Engines are identical. And things like flywheel and starter that may be different on an auto get changed anyway even when using a manual donor.

big_wasa - 14/1/19 at 08:08 AM

Crank position housing needs changing for a manual. Other than that your good to go.

theconrodkid - 14/1/19 at 08:42 AM

dont forget the spigot bearing

40inches - 14/1/19 at 11:17 AM

quote:
Originally posted by theconrodkid
dont forget the spigot bearing

Isn't that in the flywheel?

big_wasa - 14/1/19 at 11:31 AM

Zetec spigot goes in the crank. It's drilled ready.

For some strange reason the St170 comes with one ready fitted but it isn't used in the Focus.