Hi folks, I am planning to start my build this summer and have already acquired 2 donors:
1. a '89 Sierra with no engine
2. a '92 MK5 Escort XR3i
I was planning on using the engine from the XR3i, and the running gear from the Sierra,
but I would like some advice on whether I can use any of the other bits from the Escort.
For example;
Are the hubs compatible?
Could I use the breaking system,
would the wheels fit??
Can I use the steering?

Cheers for any response

What kit are you building? Most seven types like sierra hubs, steering racks etc. You going to mate the MT75/type 9 to the silvertop? I've got some knowledge with this if you need more info, as i've just done that very thing.

Chaz

I am planning on a locost book build. The Sierra has the MT75 so, yes will be mateing this to the silvertop, but any info you can spare will help cheers Ian

[Edited on 17/7/06 by tendoshingan]

I to can give you a few pointers with a zetec and mt75

You say book, do you intend to go live axle and cortina front uprights or using as much of what you have as you can ?

[Edited on 18/7/06 by big_wasa]

I am intending to use Dedion axle, already have a MK1 Escort steering rack, and know that I can modify the sierra hubs/uprights.
I just wanted to know if I could use any other parts of the XR3i such as hubs, springs, callipers etc. I haven't really got that much space to keep things lying around.

It doesnt mater how much you save, you will forget something.

What induction are you going to run ?

From the escort you will just want the engine unless you plan on using the injection and ignition?

Its the sierra where you will need to save the most from.