Skodaman can't log in so I'm asking this on his behalf.
Can someone please explain what pipework attaches to what on the Sierra master cyl as there are three possible outlets, it's a three way split. He's using Cortina brakes and an English Axle combo.
Cheers.

It's usually one to each front brake (The front two) and one to the rear.

But I expect an expert will be along shortly

Cheers

Chris

quote:

---

Originally posted by chrisg
It's usually one to each front brake (The front two) and one to the rear.

But I expect an expert will be along shortly

Cheers

Chris

---

No expert but picture may help, obviously side outlet to rear but wasn't connected at time of pic.

Top hole to Passenger side
Bottom hole to Drivers side

IIRC they need to be set like this as there is a slight bias to the drivers side.

[Edited on 1/3/07 by mike smith1]

there is more than one sierra master cyl design.

belwo is antoher.

the two outlets on the front (side and bottom) go to front pipes.

rear side outlet goes to rear; pipe goes into 1 brake cylinder then across the axcel (there are clips to hold it) ot the other cylinder.


master side view

That's great, thanks for your help.