I've levered the circular push horn but off the middle and was expecting to see a large nut to remove it, but theres nothing!
cant see any screws on the back of it.. how do these come off?
(trying not to take the whole column out at this stage!)
I have a 2 spoke (inverted 'V' ) sierra wheel on and want rid of it now.
I've levered the circular push horn but off the middle and was expecting to see a large nut to remove it, but theres nothing!
cant see any screws on the back of it.. how do these come off?
(trying not to take the whole column out at this stage!)
get your screwdriver again, and lever off the plate thats behind the horn push.
It looks like it's flush to the wheel but it's not, if you force the screwdriver in behind the rubber/plastic a tiny bit (it takes no
effort) it to will lever out easily.
hth
Steve
If it's an adjustable column there will be a blue bolt in there instead of the nyloc nut used on fixed columns.
quote:
Originally posted by worX
get your screwdriver again, and lever off the plate thats behind the horn push.
It looks like it's flush to the wheel but it's not, if you force the screwdriver in behind the rubber/plastic a tiny bit (it takes no effort) it to will lever out easily.
hth
Steve