Hi guys,

Im after a set of (4) front bolts and washers to fit my cortina calipers to the uprights.

Also, I could do with the bolts from a Sierra LSD diff including the bolts from the propshaft joint and the driveshaft joints.

Has anybody got any?

Cheers,
Matt

The propshaft bolts (4 off) are a fine pitched M10, grade 10.9 (I think - will check later if no one else knows)

The driveshaft bolts (24 off for both ends) are M8x50 torx bolts, grade 12.9 - but torx are crap, so just get ordinary 'socket cap heads' instead should only be a few £

I used High Tensile M10 bolts and Schnoor washers for my calipers on my cortina uprights