Like this.

http://www.demon-tweeks.co.uk/motorsport/mirrors/longacre-wide-angle-rear-view-mirror-kit


[Edited on 9/2/13 by evo97]

Uploaded with ImageShack.us

One I made earlier



[Edited on 9/2/13 by joemotion]

[Edited on 9/2/13 by joemotion]

tell me more.....looks like a longacre mirror did you make the brackets yourself?

No they are the longacre ones. Not cheap but worth it in my opinion

www.ebay.co.uk/itm/400390340950

Ebay! Just get the mirror, I wouldnt bother with the roll bar kit, I did and its expensive and over complicated, a few bits of aluminium strip, bent and drilled and sikaflex and/or some sort of jubilee clips woul do a better job

[Edited on 9/2/13 by blakep82]

I used a couple stainless mikalor exhaust clamps to mount mine. Cheap and looks ok.

David

buy a locost wide angle mirror here

eBay Item

make your own brackets... mines lasted 18 months with no probs..

Hi
Depends if you need to go through IVA or not
We bought one with the brkts & it failed the 1st time
Then made our own, see sketch.
The brkts were a ridiculous price anyway.


Mirror Brkts



Interior trim

Good luck whatever you choose but mind the radiuses
You can run them over, burn them to death on the exhaust
But you cant scratch em.

Thanks for the input lads......will look into it further.

Check out my photo archive for the mounts I made too