NTDWM
Radical Clubsport Chassis / Kit or Racecar Project
That car led me to this one.
GBS Zero kit car (robin hood,locust, )
Someone please tell me that the photo showing the fuel tank doesn't show what I think it shows!!!
Hint:Roll bar back stay.
quote:
Originally posted by craig1410
That car led me to this one.
GBS Zero kit car (robin hood,locust, )
Someone please tell me that the photo showing the fuel tank doesn't show what I think it shows!!!
Hint:Roll bar back stay.
quote:
Originally posted by craig1410
That car led me to this one.
GBS Zero kit car (robin hood,locust, )
Someone please tell me that the photo showing the fuel tank doesn't show what I think it shows!!!
Hint:Roll bar back stay.
I'm hoping it's just the camera angle/depth of field that makes it look as though the backstay is sitting on top of the tank.
Hopefully it's actually a good few inches above the tank and is going to be connected to the top luggage bay rail.
But it certainly caught my eye when I saw it.
It's definitely not the normal position...
Mine is about 6 to 8 inches above the tank and about 3 inches out from rear of tank and sits bolted to the top of the rear panel. I think the photo is an illusion.....
I think is just the angle of the photo, and the stay is a good bit above the tank. If you look at the stay on the right I think that they are both in about the same position as the top of the tub.