Chris_R
|
posted on 13/12/04 at 06:15 PM |
|
|
Volvo Donor
My girlfriends dad has a Volvo 240 GLT which has been diagnose with...
"I'm afraid to say that there's a hole in the sub-frame." Said the mechanic.
"Right, I see. So, how much is that gonna cost me?"
"HAAAAAAAAAAAAAAAA!!! Ha, ha, ha, ha. Just leave a blank check with reception on your way out. Best make a large deposit on your way past the
bank too, just to be sure it'll clear."
It's 91 on an H plate with recon front callipers, obviously rear wheel drive and I'm told it's a 2.4ltr. would this be of use to
anyone?
A bit of slapstick never hurt anyone.
http://www.chris.renney.dsl.pipex.com/
|
|
|
Volvorsport
|
posted on 13/12/04 at 06:46 PM |
|
|
itd make a nice donor car , engine is 2316cc - youre too far away from me tho .
try the volvo owners club , turbobricks , since there is some uk owners on that site etc .
if its only a hole in the subframe ( tell me where it is ) , thats easy repairable
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|
Chris_R
|
posted on 13/12/04 at 10:40 PM |
|
|
Thanks for the help. Think they're set on getting rid, but wanted to keep their options open. I'll get on to the Volvo owners club.
Does anyone know if there are any kits out there that use Volvo donors?
A bit of slapstick never hurt anyone.
http://www.chris.renney.dsl.pipex.com/
|
|
Volvorsport
|
posted on 13/12/04 at 11:13 PM |
|
|
you havent been watching have you ! Dala7 , theres a link somewhere - comes from sweden - if you hold on long enough , ill sell ya one
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|
Mr_B
|
posted on 14/12/04 at 01:12 PM |
|
|
Is it a saloon or an estate?
|
|
Chris_R
|
posted on 14/12/04 at 06:19 PM |
|
|
It's an estate with alloys and a leather interior.
A bit of slapstick never hurt anyone.
http://www.chris.renney.dsl.pipex.com/
|
|
Volvorsport
|
posted on 14/12/04 at 06:58 PM |
|
|
does the car actually have a fail sheet? - is there anywhere else it needs welding?
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|
Chris_R
|
posted on 14/12/04 at 07:26 PM |
|
|
I don't know unfortunately. I was told that he'd had a guy look at it who recommended getting rid of it because of the welding. He's
had it for years and didn't really wanna part with it. They've also got a 2004 Vectra.
He said he was going to sell it privately as they were gonna but a new Fiesta and asked if I knew of anyone who'd be interested in it, whole or
in bits.
That's all I know at the moment, except that it's been well looked after. Could find out though.
A bit of slapstick never hurt anyone.
http://www.chris.renney.dsl.pipex.com/
|
|