zxrlocost
|
| posted on 23/9/05 at 09:10 AM |
|
|
xr4x4i
Ok everyone the donor stripping is underway.
got an xr4x4 is the engine worth anything(im doing BEC) it seems ok to me quite quiet just needs a setting up Id say!
do I need the sierra wiring loom and what do I do about an alternator etc any info tips appreciated.
I know the main things to take off etc
take it I use the sierra brake servo master cylinder...
as above really anyhelp would be great so I can get started
thanks chris
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
|
|
stevebubs
|
| posted on 23/9/05 at 09:16 AM |
|
|
stick it on ebay.
|
|
|
mark chandler
|
| posted on 23/9/05 at 12:59 PM |
|
|
I watched Ebay to see how much the bits left over from mine will fetch, £25 gearbox, maybe the same for the engine so the effort of pulling it apart
means that once I have all the bits off mine its going to scrap (that is unless anyone wants a 4x4 Sierra without rear axle and column for free).
I,m keeping it until the cars nearly complete, even if its just for light bulbs.
|
|
|
JoelP
|
| posted on 23/9/05 at 05:39 PM |
|
|
id ditch the lot, just keep the column switches and about 6inches of wire off each. The bike engine will have its own alternator.
It really isnt worth 2 or 3 hours of your time getting the engine out and sold, unless you love getting filthy. 
|
|
|
Hellfire
|
| posted on 23/9/05 at 06:00 PM |
|
|
Brake servo master cylinder aint much use unless you're going ABS.
|
|
|
JoelP
|
| posted on 23/9/05 at 06:03 PM |
|
|
are you sure? i though the abs was a seperate unit? Maybe mine was before abs... i definately sold a MC off an f reg 4x4!
|
|
|
blueshift
|
| posted on 23/9/05 at 09:09 PM |
|
|
Sold the cologne v6 and gearbox in mine for £100. not bad considering the car cost £6.50
|
|
|
