bernie955
|
| posted on 23/3/06 at 01:22 PM |
|
|
Best front hubs for locost
I was curious. What are considered to be the best hubs to use for the front suspension of a locost?
I've seen elsewhere that Cortina are lighter than Sierra. What mods need to be done if any?
|
|
|
|
|
graememk
|
| posted on 23/3/06 at 02:05 PM |
|
|
i'd say the best would be the cheapest, hey they are locost cars lol.
but iirc cortina are the better choice
[Edited on 23/3/06 by graememk]
|
|
|
Danozeman
|
| posted on 23/3/06 at 05:10 PM |
|
|
Cortina are best but are getting stupid money,.
Sierra are common and cheap.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
Deckman001
|
| posted on 23/3/06 at 05:53 PM |
|
|
I'd say Cortina as well, but then I'm biased though 
Jason
|
|
|
bernie955
|
| posted on 24/3/06 at 08:51 AM |
|
|
Any model, or should it be later for better brakes etc.
|
|
|
Deckman001
|
| posted on 24/3/06 at 09:32 AM |
|
|
The book design is for MK3/4 or 5 Cortina's uprights as all these models of car had the same front set up
Jason
|
|
|
Chazzy
|
| posted on 1/4/06 at 08:30 AM |
|
|
if you do go sierra, try to get solid discs from the smaller engined cars, they are lighter than vented.
Chas
|
|
|
scutter
|
| posted on 1/4/06 at 11:57 AM |
|
|
Cortina hubs aren't getting too hard to find, I just payed £50 for a pair, plus a set of Jasons alloy hubs to keep the weight down for the
BEC.
ATB Dan.
|
|
|
