TGR-ECOSSE
|
| posted on 24/3/07 at 10:38 AM |
|
|
Dirty Stuff !!! (not what you think)
Whats the best way to clean the diff (sierra ) before painting it. 
|
|
|
|
|
Turbo Neil
|
| posted on 24/3/07 at 10:40 AM |
|
|
Goof TFR and a pressure washer
thats what i did to the low ratio diff i fitted to the trackcar
312bhp from a dohc turbo at 21psi
|
|
|
BenB
|
| posted on 24/3/07 at 10:43 AM |
|
|
Personally- I used a wire brush. Didn't take very long and no sign of the paint flaking after three years....
Went from
to
I even got carried away and painted the rear support bracket until I realised I didn't need it with the STM car!!!
[Edited on 24/3/07 by BenB]
|
|
|
TimC
|
| posted on 24/3/07 at 11:49 AM |
|
|
Used Wire brush on drill, then petrol, then Motorcycle Cleaner then Thinners.
Was great fun - Not.
|
|
|
TGR-ECOSSE
|
| posted on 24/3/07 at 05:54 PM |
|
|
Thanks will get the kids onto that tomorrow
|
|
|
