greglogan
|
| posted on 16/9/07 at 04:06 PM |
|
|
Cortina Bearings
Hi Guys
I am starting to refurb the cortina hubs. I have just revieved my second set of brand new bearings that also don't match the hubs. Does anyone
know the correct bearings for a MKIV / MKV cortina front hub?
Greg.
Women are meant to be loved, not understood.
|
|
|
|
|
omega 24 v6
|
| posted on 16/9/07 at 04:28 PM |
|
|
Check this threadbearing spec fron QH catalogue
If it looks wrong it probably is wrong.
|
|
|
andyps
|
| posted on 18/9/07 at 07:37 PM |
|
|
If I get time tomorrow I will look in the old Timken application book I have and get you the part numbers.
[Edited on 18/9/07 by andyps]
Andy
An expert is someone who knows more and more about less and less
|
|
|
Peteff
|
| posted on 18/9/07 at 07:58 PM |
|
|
These ones.
Here
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
greglogan
|
 posted on 18/9/07 at 10:48 PM |
|
|
I'm an idiot!!! I was trying to fit the new bearings in without taking out the old external part of the bearing (shell). It's kinda
difficult to put in new ones unless you take out all of the old one first, I guess.
Sorry guys....
Women are meant to be loved, not understood.
|
|
|
andyps
|
| posted on 18/9/07 at 11:07 PM |
|
|
If you are lucky you will be able to read the part numbers off the original bearings, alternatively take them along to a bearing distributor and they
should be able to identify them.
Andy
An expert is someone who knows more and more about less and less
|
|
|
omega 24 v6
|
| posted on 19/9/07 at 11:44 AM |
|
|
quote:
I'm an idiot!!! I was trying to fit the new bearings in without taking out the old external part of the bearing (shell). It's kinda
difficult to put in new ones unless you take out all of the old one first, I guess.
OOPS ah well all's well that ends well
If it looks wrong it probably is wrong.
|
|
|
andyps
|
| posted on 19/9/07 at 12:32 PM |
|
|
Cortina front wheel bearings are:
Inner bearing - 1988/1992
Outer bearing - LM11949/910
First part of the part number refers to the cone (the part with the rollers) the second part is the cup (the bit you forgot to take out!).
Andy
An expert is someone who knows more and more about less and less
|
|
|
Peteff
|
| posted on 19/9/07 at 04:00 PM |
|
|
Greg
don't forget to remove the outer race of the old bearing
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
greglogan
|
| posted on 23/9/07 at 08:11 AM |
|
|
Thanks guys for all your input. First hub rebuilt and painted. Pics to follow as soon as I get my camera back.
It was nice actually building something instead of taking something apart. Makes a change.
Greg.
Women are meant to be loved, not understood.
|
|
|
