alexg1965
|
| posted on 12/7/10 at 07:11 PM |
|
|
Sierra master cylinder connections
So I've got a nice new standard (non-ABS) master cylinder for a Sierra. I know that the two connections on the side go to the front and rear
braking circuits but there's also a connection at the far end (as viewed by the driver) on the underside. Does anyone know what this is for?
Thanks Alex
|
|
|
|
|
Miks15
|
| posted on 12/7/10 at 07:24 PM |
|
|
the two front ones go to the front brakes, and the rear one goes to the back, then splits with a t piece.
|
|
|
whitestu
|
| posted on 12/7/10 at 07:25 PM |
|
|
There should be 2 connections for the split circuit front brakes [one to each caliper] and one for the single circuit rear.
Stu
|
|
|
alexg1965
|
| posted on 12/7/10 at 08:31 PM |
|
|
Thanks - makes sense now.
|
|
|
