Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: VOLVO T5 transplant
Malcomius

posted on 1/4/14 at 09:57 AM Reply With Quote
VOLVO T5 transplant

Hi folks,
Can someone please give me some practical help on the fitting of a Volvo T5 lump into a Locost. I have read that the M90 RWD gearbox is the one to go for but I understand there is a BMW gearbox option as an alternative. Here are the questions I need answers to please.

1. Will the stubby M90 Volvo manual gearbox fit into the transmission tunnel?
2. If the M90 box fits, which flywheel and clutch do I use? The ones from the t5 or the ones from the Volvo 940/960 the box came from?
3. If using a BMW gearbox, which one should I use, and again which clutch and flywheel?
4. I understand point 3 needs an adaptor plate which I see is available from Sweden at about £230, any experience of this?
5. Are there any other options to go RWD with this engine?

Thank you.

View User's Profile E-Mail User View All Posts By User U2U Member
Benzine

posted on 1/4/14 at 10:20 AM Reply With Quote
I don't know about the BMW box but:


1. Will the stubby M90 Volvo manual gearbox fit into the transmission tunnel?

If you're building the chassis from scratch then you could plan it around the M90, it's FAT. If the chassis is already made, it'll need chopping up.

2. If the M90 box fits, which flywheel and clutch do I use? The ones from the t5 or the ones from the Volvo 940/960 the box came from?

I used flywheel and clutch from an 850 t5. The M90 only comes from 960s btw.

I'd advice not to go down the M90 route, expensive to buy, very fat.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Malcomius

posted on 1/4/14 at 11:16 AM Reply With Quote
Thanks Benzine, much appreciated. Do you still have a car with the 850 unit in it? Leicester is not far and I would be grateful if you had the time for a quick viewing.
Regards

View User's Profile E-Mail User View All Posts By User U2U Member
Benzine

posted on 1/4/14 at 02:06 PM Reply With Quote
Sorry I sold the gearbox a couple of years back, along with flywheel and clutch etc
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
big_wasa

posted on 1/4/14 at 06:49 PM Reply With Quote
The bmw box has been done but isn't from what I can gather straight forward.



When looking for M90 box's keep in mind there are two types of bell housing Red block and White block motors. The second being ultra rare.

View User's Profile View All Posts By User U2U Member
Volvorsport

posted on 1/4/14 at 08:32 PM Reply With Quote
Getrag is way to go gearing, prop adapter and gear linkage

there is cossie rwd adapter plates too.





www.dbsmotorsport.co.uk
getting dirty under a bus

View User's Profile Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.