jay taylor
|
| posted on 7/10/08 at 08:17 AM |
|
|
mt75 gearbox
hi all
is there anyone who knows if you can change the 3 stud output on the mt75 to the disk style on the type 9
thanks in advance
jay 
|
|
|
|
|
r1_pete
|
| posted on 7/10/08 at 09:13 AM |
|
|
You can't fit the t9 type output, but the transit MT75 has a disk output, I think its about the same PCD as the 3 prong fitting. Bailey Morris
do a compatible propshaft flange which takes a 75mm UJ, its about £35 + VAT etc....
|
|
|
meany
|
| posted on 7/10/08 at 09:18 AM |
|
|
does not the "Transit" MT75's have that type of output on.
edited to add:..doh, you just said that 
[Edited on 7/10/08 by meany]
|
|
|
zetec
|
| posted on 7/10/08 at 02:01 PM |
|
|
When I got my propshaft made it came with a small ali adapter which mated the 3 prong thingy to a standard 4 bolt u/j on the propshaft.
|
|
|
jay taylor
|
| posted on 7/10/08 at 03:11 PM |
|
|
where did you get that from zetec
|
|
|
big_wasa
|
| posted on 7/10/08 at 04:37 PM |
|
|
The adapter I think was from Dunning & Fairbank.
The Transit bit is not an easy swap.
 
|
|
|
big_wasa
|
| posted on 7/10/08 at 04:38 PM |
|
|
pic2
|
|
|
jay taylor
|
| posted on 7/10/08 at 07:45 PM |
|
|
cheers big_wasa that is mint
was worrying abit about prop attachment till now cheers mate
|
|
|
zetec
|
| posted on 7/10/08 at 09:36 PM |
|
|
That's the one!
|
|
|
