andrewturner
|
posted on 10/1/09 at 08:43 PM |
|
|
Modifying HT lead ends
Is it possible to modify HT leads and if so how?
|
|
|
thunderace
|
posted on 10/1/09 at 08:55 PM |
|
|
motorbike ones can be moded and there are things you can do with car use like add SPITFIRE MULTISPARK ect as seeb forsale on ebay.FLASHING SPARK PLUG
CAPS ect .
[Edited on 10/1/09 by thunderace]
|
|
blakep82
|
posted on 10/1/09 at 09:16 PM |
|
|
didn't you mean like changine the ends on them for different coils and stuff?
[Edited on 10/1/09 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
MakeEverything
|
posted on 10/1/09 at 09:43 PM |
|
|
not sure why youd want to "Modify" them?
I used to make them for a huge furnace where i worked once. We bought High Tension cable by the drum, and the ends and made them to length.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
andrewturner
|
posted on 11/1/09 at 05:38 AM |
|
|
Yes I want to change the ends of on the plug side from Duratec to go into a Toyota
|
|
clairetoo
|
posted on 11/1/09 at 07:48 AM |
|
|
Since modern plug lead ends appear to be molded on , I dont think you will be able to remove/refit them - the custom lead set on my car (Mazda caps ,
Ford coil pack) cost more than the engine
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
blakep82
|
posted on 11/1/09 at 12:18 PM |
|
|
i've got the same problem. vauxhall engine (twin cam, so its got those long plug leads) and ford coil pack. the vauxhall leads sort of fit the
coil, but they're a bit wobbly, and don't seal well.
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
g.gilo
|
posted on 11/1/09 at 12:41 PM |
|
|
plug leads
hi folks
go to a good bike shop, ngk do a good selection of plug caps.
graham
|
|