Echidna
|
posted on 1/6/09 at 09:25 AM |
|
|
Carbon cycle wings interest list
So, how many of you will be interested for a pair of carbon fiber cycle wings? The width of these are 220mm and their cost is 140 GBP for a pair.
If there are more than 5 orders for UK/Europe, i will offer free shipping!
In a few hours i will post some pictures.
Thanks for your time!
[Edited on 1/6/09 by Echidna]
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
|
cd.thomson
|
posted on 1/6/09 at 10:16 AM |
|
|
i will wait for pictures.. also I will need full dimensions to check that my 17inch wheels will fit underneath them
Craig
|
|
Echidna
|
posted on 1/6/09 at 10:17 AM |
|
|
Pics will come soon! Thanks!
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
cd.thomson
|
posted on 1/6/09 at 02:18 PM |
|
|
Also how will they be constructed? wet lay with a fiberglass bottom layer?
Craig
|
|
Echidna
|
posted on 1/6/09 at 02:24 PM |
|
|
quote: Originally posted by cd.thomson
Also how will they be constructed? wet lay with a fiberglass bottom layer?
No, they will be made by vacuum bagging consolidation and all the layers will be of carbon fibre (4 layers of 200gsm 2x2 3K twill carbon). Don't
be fooled by the hype that the fiberglass layers adds flexibility or lessens the brittleness of the carbon. Fiberglass adds nothing to the whole
composite part.
Brittleness of carbon fiber composites is there ony when the part is not made properly, i.e. made with wet-layup technique where you come out with a
resin rich and brittle composite part. Vaccum bagged carbon parts or vacuum infiused parts are next best to autoclaved prepregs.
It's hard to believe how stronger is a part made by vacuum bagging when comparing the same part made with cheap wet layup. And it's quite
lighter too!
Hope this makes sense!
[Edited on 1/6/09 by Echidna]
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
cd.thomson
|
posted on 1/6/09 at 02:28 PM |
|
|
It does, thanks echidna, I will look forward to pictures - especially considering the low price
Craig
|
|
Echidna
|
posted on 1/6/09 at 02:43 PM |
|
|
Craig, the arches resembles perfect the arch of a common 17 inch wheel (with low profile tyre off course), but how wide your tyres are?
[Edited on 1/6/09 by Echidna]
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
iiyama
|
posted on 1/6/09 at 03:41 PM |
|
|
quote: Originally posted by Echidna
quote: Originally posted by cd.thomson
Also how will they be constructed? wet lay with a fiberglass bottom layer?
No, they will be made by vacuum bagging consolidation and all the layers will be of carbon fibre (4 layers of 200gsm 2x2 3K twill carbon). Don't
be fooled by the hype that the fiberglass layers adds flexibility or lessens the brittleness of the carbon. Fiberglass adds nothing to the whole
composite part.
Brittleness of carbon fiber composites is there ony when the part is not made properly, i.e. made with wet-layup technique where you come out with a
resin rich and brittle composite part. Vaccum bagged carbon parts or vacuum infiused parts are next best to autoclaved prepregs.
It's hard to believe how stronger is a part made by vacuum bagging when comparing the same part made with cheap wet layup. And it's quite
lighter too!
Hope this makes sense!
[Edited on 1/6/09 by Echidna]
Actually that isnt true. Carbon is strong and light but is also brittle, regardless of how its put together, thats just the nature of the material.
Witness any accident in F1 or superbike or MotoGP race and youll see shards of carbon all over the road. The monocoques in F1 cars are not only made
from carbon but also Nomex honeycomb. The weave direction and the way its laid up make a big difference to the strength and the honycomb is in effect
a crumple zone.
For small components such as cycle wings its actually better to have a face ply of carbon backed up with glass. The glass adds a little flexability
that carbon alone does not have. Pure ridgidity that an all carbon lay up will give is not really necessary for this sort of component, although I
have to say that the cost that is normally associated with a total carbon layup would not appear to be associated with the product your offering! If
it really is a 4 ply constuction of pre-preg carbon, £140 is a bargain.
[Edited on 1/6/09 by iiyama]
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
Echidna
|
posted on 1/6/09 at 03:51 PM |
|
|
I agree, carbon is a brittle material by its nature. I have written this in the past too. Read the last post of the thread in the link.
http://locostbuilders.co.uk/viewthread.php?tid=112666
Carbon is brittle, it will break in a brittle fashion, like the carbon parts you see all over the road when a F1 car collides somewhere. But, a carbon
part will take a lof of effort prior collapsing.
When properly made, carbon has good flexibility, not that good as kevlar but good enough. Adding a layer of fiberglass to the carbon composite will
not change anything just because the carbon fibers will still snap.
Tons of pages have been written on composite mechanics. Carbon is brittle but not extremely britle as people tend to think. And they think that way
because they are used to parts not properly made. Carbon has gotten this bad name due to inapropriate techniques of manufacturing, this is wet layup.
140GBP for a 4-layer carbon part is really a bargain, 200GBP or 300GBP with a layer of cheap fiberglass is just insane!
[Edited on 1/6/09 by Echidna]
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Jon Ison
|
posted on 1/6/09 at 04:11 PM |
|
|
Slightly off topic but on topic to, I have looked several times for a set of rear arch's in carbon, to date don't have any ?
Are they next on production list, as for interest list, a set of four yes (front & rear), two fronts not just yet.
|
|
Echidna
|
posted on 1/6/09 at 04:13 PM |
|
|
quote: Originally posted by Jon Ison
Slightly off topic but on topic to, I have looked several times for a set of rear arch's in carbon, to date don't have any ?
Are they next on production list, as for interest list, a set of four yes (front & rear), two fronts not just yet.
Yes, i will soon have rear wings in my production list, i will keep you updated!
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
goaty
|
posted on 1/6/09 at 05:59 PM |
|
|
any pics yet??
will they suit 205/60/13 tyres??
especially round the diameter fo the tyre and rim??
cheers
|
|
Echidna
|
posted on 5/6/09 at 01:26 PM |
|
|
Pic1
![](/galpreviews/a959584-DSC00624.jpg) ![Rescued attachment DSC00624.jpg](/gallery/a959584-DSC00624.jpg) Rescued attachment DSC00624.jpg
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Echidna
|
posted on 5/6/09 at 01:27 PM |
|
|
Pic2
![](/galpreviews/a959585-DSC00625.JPG) ![Rescued attachment DSC00625.JPG](/gallery/a959585-DSC00625.JPG) Rescued attachment DSC00625.JPG
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Echidna
|
posted on 5/6/09 at 01:27 PM |
|
|
Pic3
![](/galpreviews/a959587-DSC00626.JPG) ![Rescued attachment DSC00626.JPG](/gallery/a959587-DSC00626.JPG) Rescued attachment DSC00626.JPG
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
goaty
|
posted on 5/6/09 at 07:32 PM |
|
|
are you making CSR ones yet? these look good thoguh![](/images//smilies/bigsmile.gif)
|
|
Echidna
|
posted on 6/6/09 at 04:42 AM |
|
|
quote: Originally posted by goaty
are you making CSR ones yet? these look good thoguh
Not yet but i hope they will be available soon.
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Echidna
|
posted on 6/6/09 at 08:41 AM |
|
|
But the new aeroscreen will be ready very soon!
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Echidna
|
posted on 8/6/09 at 10:08 AM |
|
|
Anyone who is interested for the carbon cycle wings, please post here. Thanks!
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Ciprian
|
posted on 3/2/12 at 10:46 PM |
|
|
topic revival. is this still on ?
|
|
loggyboy
|
posted on 3/2/12 at 10:54 PM |
|
|
2.5 yr old thread!?! really??
|
|
Ciprian
|
posted on 4/2/12 at 06:27 PM |
|
|
guess not. shame. looks like good quality and better priced than normal.
|
|