Sij
|
| posted on 18/4/10 at 06:16 AM |
|
|
Burning Oil
After adjusting the valve clearance on my xflow It has started burning Oil. I removed the spark plugs, and found the plugs on cylinder 3 & 4 were
covered with oil. The valve clearance were quite tight I reset them to manu spec. could it be burnt valves?
|
|
|
|
|
theconrodkid
|
| posted on 18/4/10 at 10:03 AM |
|
|
cant see that causing the problem,when does it smoke?
who cares who wins
pass the pork pies
|
|
|
britishtrident
|
| posted on 18/4/10 at 10:35 AM |
|
|
Piston/ piston ring problem or valve guide problem.
Because of the top heavy piston design Xflo's tend to suffer more than most from bore wear if revved to any great extent.
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
|
