charlie_pank
|
posted on 3/6/12 at 11:57 AM |
|
|
Diff rebuild near Edinburgh
I've got a push-in 3.14 quaife ATB and am getting hold of a 3.92 crown-wheel and pinion. I'd like someone to build me a 3.92 ATB with
push-in shafts from the 2 donor units. Can someone recommend a builder near Edinburgh? What sort of price should I pay for that if I supply all the
bits for it?
Thanks
Charlie
|
|
|
theprisioner
|
posted on 3/6/12 at 12:12 PM |
|
|
ASK
ASK Transmissions, Unit 1a, Old Redding Rd, Falkirk , FK2 9JU, 01324 629222. Resealed my Westfield/Ford limited slip unit no problem, required them to
rebuild it.
|
|
Hector.Brocklebank
|
posted on 3/6/12 at 12:40 PM |
|
|
que long list of
quote:
first dibbs on the 3.14 crown wheel & pinion please !!!!
Some people can never handle the truth and always try to shoot the messenger instead of taking an honest look in the mirror (its always easier to
blame another than to face reality), but secretly they wish they could grow a pair and be the messenger !!!
|
|
charlie_pank
|
posted on 3/6/12 at 01:04 PM |
|
|
Might be a while coming, there's a baby due in the next 4 weeks! You can have first dibbs when I finally get around to it though...
|
|
AdrianH
|
posted on 3/6/12 at 05:55 PM |
|
|
I would suggest getting hold of a complete 3.92, 7 inch Sierra diff from ebay or someone who has a spare. I picked up mine for £50 last year.
Use this to form part of your diff build or to get the 3.14 ratio diff back to a standard open diff. You will get quite a bit for it.
Adrian
Why do I have to make the tools to finish the job? More time then money.
|
|