Matt230
|
posted on 22/2/16 at 03:33 PM |
|
|
Phoenix Body parts
Hi all
How available are Phoenix body parts? Coming from and Elise and VX220 particularly I know of how hard they can be to source.
Kind regards
Matt
|
|
|
jeffw
|
posted on 22/2/16 at 03:40 PM |
|
|
Raw own the rights and will sell you a body
|
|
alfas
|
posted on 22/2/16 at 06:13 PM |
|
|
but raw is producing the phoenix only in its later form with this kind of rear:
what is when you need body parts for such a car:
and are the raw bonnet and the sills interchangeable on both cars?
|
|
jeffw
|
posted on 22/2/16 at 07:41 PM |
|
|
The 2nd picture is a MkIV Clubman and not really a Phoenix. The sills and bonnet from the later car should fit.
[Edited on 22/2/16 by jeffw]
[Edited on 23/2/16 by jeffw]
|
|
alfas
|
posted on 23/2/16 at 02:27 PM |
|
|
how would you call that one, as it hasnt the spoiler front?
[Edited on 23/2/16 by alfas]
|
|
peter030371
|
posted on 25/2/16 at 04:20 PM |
|
|
NTDWM but have you seen this Sylva Phoenix MK4 body panel fibreglass moulds
Not sure of the legality of it...
|
|
jeffw
|
posted on 25/2/16 at 05:14 PM |
|
|
I would call the red one a MkIV Clubman with a non-air dam bonnet. You can see that it is not the same as the later Phoenix but had hints of the Fury
(like the back does).
[Edited on 25/2/16 by jeffw]
|
|
alfas
|
posted on 25/2/16 at 07:39 PM |
|
|
but the maroon-one (1991 reg date) already have the rocker-arm suspension at front, 100% based on escort, and the more spacoius inside...compared to
the "real" MK4 clubman.
|
|
lebaron07
|
posted on 16/3/16 at 10:34 AM |
|
|
Raw does have a specific bonnet but you can get the oldstyle bonnet by this guy who owns the moulds
Rob at cyana +44 7918 638 546
Rgds
|
|
alfas
|
posted on 16/3/16 at 10:40 AM |
|
|
does rob also own moulds for the other body parts or only bonnet?
|
|
lebaron07
|
posted on 16/3/16 at 12:03 PM |
|
|
Hi the whole set is available.
I've already ordered one to retrofit a striker to a phoenix.
Thick fiberglass , some crazing in the moulds requires an after production paint to the panels/bonnet/clam.
Great guy with a stragth forward business relation
Rgds from Belgium
|
|
reb
|
posted on 18/3/16 at 08:54 AM |
|
|
quote: Originally posted by lebaron07
Hi the whole set is available.
I've already ordered one to retrofit a striker to a phoenix.
Thick fiberglass , some crazing in the moulds requires an after production paint to the panels/bonnet/clam.
Great guy with a stragth forward business relation
Rgds from Belgium
Thanks for this info!
|
|