Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Sierra Estate
eenud

posted on 18/10/02 at 06:34 PM Reply With Quote
Sierra Estate

I have been offered a cheap H reg Sierra Estate, which has just failed its test. Is the rear end the same as the saloon. Any other comment would be welcome before i go and look.

Thanks

Ian

View User's Profile E-Mail User View All Posts By User U2U Member
bsilly

posted on 18/10/02 at 06:44 PM Reply With Quote
rear end is same but for shock mounts in different place,more shape to trailing arm,and bigger brakes.





mainly digger drivin me

View User's Profile E-Mail User View All Posts By User U2U Member
Dunc

posted on 19/10/02 at 11:12 PM Reply With Quote
Whats the engine?
View User's Profile View All Posts By User U2U Member
eenud

posted on 27/10/02 at 08:44 AM Reply With Quote
a State

Dunc,

The engine is a CVH 1800, but I would rather fit a cross flow. I do want to use the rest of the running gear.

Ian

View User's Profile E-Mail User View All Posts By User U2U Member
Highcost builder

posted on 27/10/02 at 08:00 PM Reply With Quote
good man x flow.
View User's Profile E-Mail User View All Posts By User U2U Member
loggyboy

posted on 30/8/17 at 09:36 AM Reply With Quote
quote:
Originally posted by eenud
Dunc,

The engine is a CVH 1800, but I would rather fit a cross flow. I do want to use the rest of the running gear.

Ian


Good one to break as the sump is worth more than rest of engine on the CVH as they can be modded to suit the Zetec.
Starter can also be used on a zetec conversion (if its the slimine one). So you can make some money back from those.





Mistral Motorsport

View User's Profile View All Posts By User U2U Member
mcerd1

posted on 30/8/17 at 12:03 PM Reply With Quote
Sounds like a decent donor car to me

H reg with a 1.8 CVH - should have a 5 speed type 9 box with a short input shaft (pretty good for an X-flow, Pinto or Zetec E)

as above the CVH sump (and some other odds and sods) should be useful to someone fitting a Zetec E, so don't just bin it


the diff could be either a 7" or 7.5" at that age (both likely to be a 3.9 ratio)
the axle code on the VIN plate will tell you what it had originally, but best to check the diff itself

the driveshafts could be push-in type if its got rear drums (which I believe is most common on this version), but it might have the bolt-on version if its got rear disc brakes instead (ie. if it had the optional ABS)

the front brakes will be either 240mm or 260mm vented ones, but the hubs are the same for both anyway





-

View User's Profile View All Posts By User U2U Member
Benzine

posted on 30/8/17 at 12:33 PM Reply With Quote
That's quite a thread bump right there
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
loggyboy

posted on 30/8/17 at 12:38 PM Reply With Quote
Christ - someone else must have bumped and then deleted their post!

[Edited on 30-8-17 by loggyboy]





Mistral Motorsport

View User's Profile View All Posts By User U2U Member
mcerd1

posted on 30/8/17 at 03:06 PM Reply With Quote
quote:
Originally posted by loggyboy
Christ - someone else must have bumped and then deleted their post!

[Edited on 30-8-17 by loggyboy]

i didn't spot that either... I'm blaming sleep deprivation (up all night with a teething baby again )





-

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.