danro
|
| posted on 13/1/19 at 10:54 PM |
|
|
Looking at an automatic 2.0l mondeo as a doner to mate to a type 9 box
Are there any issues bolting 2.0 black top zetec that originally had an auto transmission to a type 9 gearbox.
I would be getting the whole car so all the bolt on bits could follow too.
I was just wondering if this was viable or I should only look at the manual options.....
Cheers chaps
[Edited on 13/1/19 by danro]
[Edited on 13/1/19 by danro]
|
|
|
|
|
loggyboy
|
| posted on 13/1/19 at 11:39 PM |
|
|
Engines are identical. And things like flywheel and starter that may be different on an auto get changed anyway even when using a manual donor.
Mistral Motorsport
|
|
|
big_wasa
|
| posted on 14/1/19 at 08:08 AM |
|
|
Crank position housing needs changing for a manual. Other than that your good to go.
|
|
|
theconrodkid
|
| posted on 14/1/19 at 08:42 AM |
|
|
dont forget the spigot bearing
who cares who wins
pass the pork pies
|
|
|
40inches
|
| posted on 14/1/19 at 11:17 AM |
|
|
quote:
Originally posted by theconrodkid
dont forget the spigot bearing
Isn't that in the flywheel?
|
|
|
big_wasa
|
| posted on 14/1/19 at 11:31 AM |
|
|
Zetec spigot goes in the crank. It's drilled ready.
For some strange reason the St170 comes with one ready fitted but it isn't used in the Focus.
|
|
|
