mangogrooveworkshop
|
| posted on 22/5/07 at 10:16 AM |
|
|
Part number for sierra master cylinder internals
As above
Thanks in advance
Pat
[Edited on 22-5-07 by mangogrooveworkshop]
|
|
|
|
|
Bluemoon
|
| posted on 22/5/07 at 10:50 AM |
|
|
Which one? There are two types I think, silver cast one and black tube one.. (Can't help with part numbers though..).. If you have any luck in
obtaining a rebuild set let me know..
Dan
|
|
|
02GF74
|
| posted on 22/5/07 at 11:02 AM |
|
|
there are at least 2 types not including the servo ones. I took mine to be matched in car parts place and they differ by the mounting flange plus
other non-obvious differences.
from memory, I mine is D reg sierra - have it written down somewhere but where? take a look at my photo archive as there should be a photo of it.
(it was black but the replacement is gold)
|
|
|
Bluemoon
|
| posted on 22/5/07 at 01:30 PM |
|
|
I like the cat... Ours is to timid to go into the garage, to much noise...
Dan
|
|
|
Dick Axtell
|
| posted on 22/5/07 at 04:44 PM |
|
|
Sierra Mcyl P/N
The Girling cast-bodied mcyl was 74066314, & 74066315. LH & RH, tho not sure which was which.
Didn't know that piston sub-assys were still sold separately.
Work-in-Progress: Changed to Zetec + T9. Still trying!!
|
|
|
