Okay, have finished plumbing up a cooling system in my mock up chassis. I used a Audi aluminum radiator, that I hope will be big enough. (Cost nothing, from a friend)


radiator

Fitted two Opel aircon fans, one will be operated by a thermo switch, the other on a manual dash switch

fans

Made a stainless steel header tank and swirl pot.

[img][/img]

Header tank fitted to rollbar.

header

The rover water pump is removed.


cooling

The pump is a Davies Craig electrical.


pump

The hard piping was free, and is 38 mm OD aluminum tube, originally sold as curtain rails.

Now I just have to make up a partial wiring harness, and sort the fuel supply, before I can start the motor!

Cheers

Fred WB

pipes

nice one! love the header and swirl pot. ill be keeping an eye out for curtain rails now too!