Board logo

Mid engined - single seater - progress photos
lsdweb - 7/3/06 at 03:19 PM

Hi All

My Swift is coming together slowly - the rear wishbones (well one side) have been tacked up (there are more tubes to go in!) and fitted and the steering column has been moved (this was originally offset to the nearside to allow for the H pattern Hewland change. The gear lever (sequential obviously) will now sit on the nearside for a straight run to the gearbox.

Have a look here - scroll down to the 7th March bit.

Regards

Wyn

[Edited on 7/3/06 by lsdweb]


cita2 - 7/3/06 at 03:50 PM

That sure is a nice car !!!
gonna use it for track only or have you plans to put it on the road?

Cheers,
Cita


lsdweb - 7/3/06 at 04:49 PM

It'll be sprints and hillclimbs only (although I do have a race licence..........)

I think SVA would be impossible


welderman - 7/3/06 at 04:56 PM

Looking good. Bet you can't wait for it to be finnished.


lsdweb - 7/3/06 at 05:02 PM

Thanks Joe

I'm on leave at the end of this month and he's sort of promised it'll be ready........

We've agreed that it'll be rolling with the bodywork refitted - he's a fibreglass / carbon fibre / kevlar man so that'll be easy. All I'll have to do is plumb it all in, throw some wires at it and do all the refitting of things like fuel tank, extinguisher - easy

Regards

Wyn


welderman - 7/3/06 at 06:20 PM

5 Min of a job then Eh!!