THIS I GOT KADETT 1.5TD ISUZU I DOT HIT WHIT A SKODA FELICIJA WHIT 160KM/H
AND I GOT DONOR.ANY BODY GOT AN IDEA IS IT WORTH THE EFORT THE ENGEN IS IN OK AND THE CAR IS WERY AGILE.
WHAT TO BUILD OUT OF IT AND CAN Y BUILD ENYTHING

[Edited on 12/1/07 by Kamikza]
Rescued attachment New Image.JPG

?

If its FWD...

check the gearbox incase it got damaged when the drive shaft was ripped out.

Not an ideal donor, can't you find something a little less smashed??


[Edited on 12/1/07 by macnab]

IT IS fr and the gear box is ok the axsel broke in haf living the gear box intact .so what to make

quote:

---

Originally posted by Kamikza
IT IS fr and the gear box is ok the axsel broke in haf living the gear box intact .so what to make

---

you could make a camp fire with the bits that will burn then weigh in the rest as scrap metal?

or strip the car ebay the bits from it and put towards something better

[Edited on 12/1/07 by graememk]

Well if you’re serious about using it as a donor. Why not put a post in the mid engine part off the forum and see if anyone can help you make a chassis for it.

That is off course if you are allowed to make you own car where you live. I think I would check local regulations first before starting anything.

quote:

---

Originally posted by graememk
you could make a camp fire with the bits that will burn then weigh in the rest as scrap metal?


Eddie Hitler you and your fires...

---

iank - 12/1/07 at 11:30 AM

quote:

---

Originally posted by bartonp

quote:

---

Originally posted by Kamikza
IT IS fr and the gear box is ok the axsel broke in haf living the gear box intact .so what to make

---

Sell the parts and buy something more suitable

---

More suitable in what way, this is the mid engine forum

---

Kamikza - 12/1/07 at 11:49 AM

so do you got plans for some thing simple!?
Does not hawe to corner and handle like F1 that is simple hah

Emocional link whit te car he yust kiding i dont hawe money for fuel it is wery expensiv but burning oil is not hahah

[Edited on 12/1/07 by Kamikza]

---

Kamikza - 12/1/07 at 03:37 PM

newer i am a good guy

---

macnab - 12/1/07 at 06:17 PM

Sorry about that comment I made Kamikza. It was meant as a joke but really was not at all funny.



Ok, then maybe here is something you and some friends could make. That cars engine and gearbox will go in the back the rest of the bits can come from scrap cars.

Old steel tube could be used and welded up to make the frame just find someone who could bend tube and weld it. This is about as simple as you can make a car and it would be a lot of fun and quite fast.

Although instead you could find the worst VW beetle you can and use that as the donor since none of the rusty metal needs to be used…



[Edited on 12/1/07 by macnab]
Rescued attachment rail.jpg

---

Kamikza - 14/1/07 at 09:39 PM

no mater i is ok and so baya is the simples as it getstanks for the impot consider us now frends

---

locost_bryan - 19/1/07 at 03:08 AM

The original Lotus 7 only had 28hp! - a 1.5 turbodiesel should make more.

You could start with the standard Locost chassis, and convert it to mid-engine by shortening the engine bay, and adding a box frame behind the cockpit to carry the engine and rear suspension.

Pity you lost the driveshaft and strut, or you could have used those at the rear.

---

Kamikza - 22/1/07 at 01:52 AM

ill buy new ones tanks for the tip !

---