Lowcost Seven, fibreglass Nose Cone Mould
Only used 5 times
£80
Single seater style nose cone mould, Nose cone to fit seven/lowcost style car
£50
Pair of Lowcost Seven, Fibreglass Rear Wheel Arch Moulds
Used only 3 times
£65
Fibreglass Seat mould for Kit Car seats
Used only a few times
Seat width 405mm at the Hip
£95
Fiberglass Kit Car seats
One grey and one black gelcoat, so would need painting to match. The grey seat has a small chip on the edge that needs filling prior to painting
(small easy job)
£60 pair or £35 each SOLD
MGF Glass fibre Side Skirt and airscoop Moulds
Made from the original works team race car
Only used once
£100
Hyundai Coupe Fibreglass mould to produce race car style front valance modification
£20
Glass fibre mould to produce car bonnet/roof air scoops Ideal for sevens
£30
Glass fibre Bonnet/roof air scoop
Bond onto existing bodywork for that race car modified look
Have two £10 each, one was painted for a paint test
Suzuki cappuccino Fibreglass mould to produce racing style bonnets with air induct
£60
2 Wide wheel arche moulds (was made to fit Suzuki cappuccion) will fit many cars
Lightweight Fiberglass seat to fit track car (very low position)
£35
15miles west of Hull A63/M62
[Edited on 12/7/12 by fifty50]
What are the seat base widths please?
pic and dimensions of bonnet scoop please
Info for where to collect parts and dimension of seats if not already sold.
cheers
sam
Hi . I will take the seat moulds please.
I believe you are based in Hull, if so Ican collect as I live there too.
Please U2U me with phone number.
Regards Denis.
I sent a U2U yesterday and still waiting for a reply...........
quote:
Originally posted by loggyboy
What are the seat base widths please?
Whats still left
Lowcost Seven, fibreglass Nose Cone Mould
Only used 5 times
£80
Single seater style nose cone mould, Nose cone to fit seven/lowcost style car
£50
Pair of Lowcost Seven, Fibreglass Rear Wheel Arch Moulds
Used only 3 times
£65
Fibreglass Seat mould for Kit Car seats
Used only a few times
Seat width 405mm at the Hip
£95
MGF Glass fibre Side Skirt and airscoop Moulds
Made from the original works team race car
Only used once
£100
Hyundai Coupe Fibreglass mould to produce race car style front valance modification
£20
Glass fibre mould to produce car bonnet/roof air scoops Ideal for sevens
£30
Glass fibre Bonnet/roof air scoop
Bond onto existing bodywork for that race car modified look
£10 It was painted for a paint test
Suzuki cappuccino Fibreglass mould to produce racing style bulged bonnets with air induct
£60
2 Wide wheel arche moulds (was made to fit Suzuki cappuccion) will fit many cars
Lightweight Fiberglass seat to fit track car (very low position)
£35
Vented Mini Bonnet mould (same as Zcars They copied mine)
£95
[Edited on 14/7/12 by fifty50]
Any chance of a pic of the results of the bonnet scoops that can be created from the moulds please? i.e. the £30 mould and the scoop up for a
tenner.
Thanks
Nick
quote:
Originally posted by nick997
Any chance of a pic of the results of the bonnet scoops that can be created from the moulds please? i.e. the £30 mould and the scoop up for a tenner.
Thanks
Nick
U2U sent with email address
Cheers
Nick