Board logo

"C" Spanner offer
andyw7de - 23/6/08 at 09:19 PM

Going to be water cutting one for myself and wondered if anyone else would be interested.

I will be cutting them from 6mm mild steel instead of the usual 3mm. ( its kinder on the hands)

The finish will be Zinc plated so wont rust.

These are just under a tenner on the bay of e delivered ( 3 mm thick)

Im offering these for £5 each inc postage

PM me if interested

Cheers

Andy

PS Trader status paid for but status not updated

CRAIGR - 23/6/08 at 09:21 PM

Will they be for 1.9's or 2.25's Andy

andyw7de - 23/6/08 at 09:26 PM

Can do either for the same price

Cheers

Andy

CRAIGR - 23/6/08 at 09:27 PM

1.9 one for me then please

andyw7de - 23/6/08 at 09:31 PM

Cheers Craig,

PM me your details

I'll let you know when they come back from being zinc plated

Mark G - 23/6/08 at 09:31 PM

I'll have one too if it'll fit ProTech shocks?

andyw7de - 23/6/08 at 09:34 PM

quote:
Originally posted by Mark G
I'll have one too if it'll fit ProTech shocks?


I think Protech shocks are 2.25

PM your details

Cheers

Andy

se7ensport - 23/6/08 at 09:40 PM

2.25 please - u2u on way


Cheers

Alex

miikae - 23/6/08 at 09:45 PM

One of each please u2u Sent

Cheers

Mike

indykid - 23/6/08 at 09:49 PM

quote:
Originally posted by andyw7de
quote:
Originally posted by Mark G
I'll have one too if it'll fit ProTech shocks?


I think Protech shocks are 2.25

PM your details

Cheers

Andy


most protech dampers on 7s have 1.9"id springs.

they do also do 2.25" spring platforms but usually on bigger stuff

tom

theconrodkid - 23/6/08 at 09:49 PM

why not make them double ended,1.9 and 2.25

cjtheman - 23/6/08 at 09:51 PM

i'll take one as well mate
i will pm you tomorrow with size for my spax shocks
cheers
colin

andyw7de - 23/6/08 at 09:55 PM

quote:
Originally posted by theconrodkid
why not make them double ended,1.9 and 2.25


Hmm Ill have a look at that tomorrow

Just add one end on from the other drawing

Hadders - 23/6/08 at 10:08 PM

PM sent Andy. Cheers.


Ben

omega 24 v6 - 23/6/08 at 10:33 PM

A double ender sounds like a good idea. let us know if it's a goer will you.

blakep82 - 23/6/08 at 11:05 PM

oooh, i'll measure up my back axle locking rings. i need one from them, but i'd like one for the shocks anyways. i'll have a lok tomorrow

twybrow - 24/6/08 at 12:40 AM

I am in the States at the mo, so cant measure my shocks (anyone know what dimater Gaz shocks are?). I would love a spanner tho - the double ender (oh err Mrs) sounds great. U2U sent

CRAIGR - 24/6/08 at 07:19 AM

Double ender sounds a blinding idea even if it comes to a tad more.

house19uk - 24/6/08 at 07:22 AM

1.9 for me as well please or a double ender if you can do one

mad4x4 - 24/6/08 at 07:45 AM

U2U Sent - OO er - Double-ender

or 1 or each if thats not possible

aka Keith - 24/6/08 at 08:18 AM

Andy, would be interested in both, if you do not do the double ender.. have AVO shocks and do not know what size they are.

Ping me a u2u for payment details.

DaveFJ - 24/6/08 at 09:22 AM

why not make the bigger size and put in a simple pin joint halfway round the arc? that way it would work with either size... or would that overcomplicate things?

like this




[Edited on 24-6-08 by DaveFJ]

RichardK - 24/6/08 at 10:46 AM

I'm up for one as well, if the double ender isn't a goer then I'll have a measure. Cheers Rich

pajsh - 24/6/08 at 10:55 AM

Count me in for a 1.9 please.

U2U on it's way.

02GF74 - 24/6/08 at 10:58 AM

quote:
Originally posted by DaveFJ
why not make the bigger size and put in a simple pin joint halfway round the arc? that way it would work with either size... or would that overcomplicate things?

like this




[Edited on 24-6-08 by DaveFJ]


it does make it a bit more complicated - also with the pivot types, like above, I have found they tend to jump out of the slot - never had that happen with a solid one.

(that is a good deal BTW - unfortunately I already have some).

Stuart_B - 24/6/08 at 11:58 AM

hi, can i have one for pro tech shocks please, not sure the size will messure later, or a double ended one if you are going to make it.

u2u is on its way

thanks

stuart

aka Keith - 24/6/08 at 12:51 PM

Pajash, our U2U came to me by mistake. you may need to send it again.

quote:
Originally posted by pajsh
Count me in for a 1.9 please.

U2U on it's way.

Bluemoon - 24/6/08 at 01:21 PM

U2U to you

oldtimer - 24/6/08 at 03:51 PM

I'd like a double-ender if they're being made. Cheers

Big Daz - 25/6/08 at 09:45 AM

Can you add me to the list for a 1.9 or double ender please?

Cheers

Daz

Snuggs - 25/6/08 at 06:52 PM

Bugger

Just bought one at Newark for 7.50

eccsmk - 25/6/08 at 07:18 PM

you should have i nice little u2u
for a 1.9" jobbie

andyw7de - 25/6/08 at 07:24 PM

Ok Guys got the drawing done today and its safe to say tha the double ended "C" spanner will happen.

The sad news is that I will need to charge £10 for it due to it obviously being bigger takes more metal, more machine time and more postage. (All the bits that cost me)

Still a bit of a bargin I think

For those who have U2U'd me asking for a double ender (ooo err) then Ill assume this is ok unless i here otherwise

If you've ordered a single size but would like a double ender also please let me know

I will be cutting 20 of each size and double spanners tomorrow so will have spares if anyone else is interested.

I am looking to cut some brake drum to disc adapter plates if anyone is interested.

Thanks a lot to all who have ordered, the spanners will be getting zinc plated on Monday so should should be ready to send out on Wednesday

All the best

Andy

mgmiller - 25/6/08 at 10:02 PM

Hi Andy,

I'm interested in the double ender if you have any left.

U2U me your payment details.

Cheers

Mark

miikae - 7/7/08 at 10:57 AM

Many thanks Andy , great stuff just what i wanted , my 2 just popped through the door .

Mike

omega 24 v6 - 7/7/08 at 11:29 AM

Mine's are here thanks very much.

Stuart_B - 7/7/08 at 05:58 PM

i got mine to.

thanks

stuart

se7ensport - 7/7/08 at 06:49 PM

very nice, thank you.


Alex

Hadders - 7/7/08 at 08:47 PM

Got mine today Andy. Spot on. Many thanks.

Mark G - 7/7/08 at 08:56 PM

Recieved mine today too.

Many thanks.

cjtheman - 7/7/08 at 09:26 PM

got mine today as well spot on thanks andy
cheers
colin

Andy W - 8/7/08 at 06:08 AM

Arrived today, spot on

Thanks Andy

[Edited on 8/7/08 by Andy W]

kipper - 8/7/08 at 07:19 AM

If it's not too late can you do me a double ender , that sounds so rude. I will u2u for details of payment.
Regards Kipper.......AKA Denis.

Bluemoon - 8/7/08 at 08:07 AM

Got mine two..

Thanks

Dan

matt_gsxr - 8/7/08 at 01:09 PM

mine arrived,

thanks muchly,

Matt