Steve
|
| posted on 1/11/18 at 09:41 AM |
|
|
Iva emissions fail
Could anyone help? My kit has failed today on it’s emissions it was ok on co but failed on hc. How do I get these down It’s a carb’d zx1000 Would
a cat help??
|
|
|
|
|
russbost
|
| posted on 1/11/18 at 09:56 AM |
|
|
No, if it's failed on HC's it must be running very poorly generally, it should pass easily., albeit possibly only when rpm is raised a
little
You need to check all usual culprits, ignition, carbs etc, but I would start with valve clearances, they closed up on both of my ZX10's &
made them run like a bag of poo
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
cliftyhanger
|
| posted on 2/11/18 at 06:40 AM |
|
|
I think balance can upset HC too.
If you can get hold of a balancer that connects to all 4 at the same time it makes life very easy. Remember to balanceat idle and just off idle to
make sure the linkages are set correctly.
|
|
|
