lsdweb
|
| posted on 1/1/11 at 02:50 PM |
|
|
Oyster tools for £1!
Hi All
My local B&Q had Oyster tools loose in the £1 bin a couple of days ago - they weren't barcoded so the guy was happy to sell them as a
manager's special for a £1.
Worth a look if you're after one and in B&Q.
Wyn
|
|
|
|
|
Barksavon
|
| posted on 1/1/11 at 03:19 PM |
|
|
wots an oyster tool.................
|
|
|
lsdweb
|
| posted on 1/1/11 at 03:27 PM |
|
|
http://www.youtube.com/watch?v=2MwmDJuOGwU
All courtesy of mangogroveworkshop
|
|
|
Barksavon
|
| posted on 1/1/11 at 03:39 PM |
|
|
.....i'm off to b&q
|
|
|
Andi
|
| posted on 1/1/11 at 04:08 PM |
|
|
Typical..
I got one of a mate yesterday for a tenner.
Couldnt get one at our bandq some months ago.
|
|
|
kj
|
| posted on 4/1/11 at 03:12 PM |
|
|
If anyone is in the North East and looking for one B&Q Sunderland have them for £2 in 15mm & 22mm, down near the plaster boards in the bargin
boxes.
|
|
|
Irony
|
| posted on 4/1/11 at 03:18 PM |
|
|
I need one of those!!!
|
|
|
lsdweb
|
| posted on 4/1/11 at 03:24 PM |
|
|
I've got one spare - I will 'sell' it for a fiver. If somebody wants it and promises to put a fiver in the next cancer charity box
they see, I'll post it to them!
Wyn
|
|
|
Irony
|
| posted on 4/1/11 at 03:49 PM |
|
|
U2U sent
|
|
|
TPG
|
| posted on 15/1/11 at 05:51 PM |
|
|
Cheers Wyn. It's £5 in the Macmillan Box on the bar at the Little Drovers at Dallowgill this weekend.
..Which was nice..
|
|
|
COREdevelopments
|
| posted on 15/1/11 at 06:25 PM |
|
|
Thats very kind of you Wyn. I got mine for 50p from llanelli B&Q, The assistant didnt know what it was for. But neither do i know its true use.
Rob
|
|
|
40inches
|
| posted on 15/1/11 at 08:56 PM |
|
|
quote:
Originally posted by COREdevelopments
Thats very kind of you Wyn. I got mine for 50p from llanelli B&Q, The assistant didnt know what it was for. But neither do i know its true use.
Rob
They are for making a sliding connection, in the kit you get fittings to screw into,say, a radiator, said fitting has an O ring in the bore, you push
a length of copper tube through the fitting and crimp the end of the tube with the Oyster pliers, this stops it pulling out, screw fitting into rad
and this gives you adjustment from the rad(or whatever) to the inlet pipe. You still awake 
|
|
|
