Westy1994
|
posted on 4/6/12 at 07:30 PM |
|
|
Rear spring rate
Having fitted the springs I have and mostly driving solo, the springs I have are just right. BUT I do carry the odd passenger who is feeling
brave...
This really messes my spring rate up and causes all manner of issues, I have wound the spring seats up to counteract this, but need to put this back
again after the two up motoring is over due to too much preload on the springs.
There a quite a few springs available on the for sale section, but don't really want to get those to find I still have issues.
I weigh about as much as a feather, hence why a passenger has so much effect
What are folks using as a good balance between solo and two up driving, car is a road car only.
Rich.
|
|
|
Westy1994
|
posted on 7/6/12 at 03:45 PM |
|
|
?
No one wants to reveal what rear spring rates they use?
|
|
coyoteboy
|
posted on 7/6/12 at 04:13 PM |
|
|
Seems to me that you dont necessarily need a higher spring rate. By adjusting your collars you're simply correcting the ride height, not
changing the spring rate. If you modify the spring to a stiffer one you'll end up compromising the action without passengers.
|
|
scoop
|
posted on 7/6/12 at 05:19 PM |
|
|
What is your current rate and are the shocks ones that have been designed or your car?
|
|
Westy1994
|
posted on 7/6/12 at 05:51 PM |
|
|
quote: Originally posted by coyoteboy
Seems to me that you dont necessarily need a higher spring rate. By adjusting your collars you're simply correcting the ride height, not
changing the spring rate. If you modify the spring to a stiffer one you'll end up compromising the action without passengers.
Yes I am well aware of that , which is why I asked the question.
I have not specified my existing rate for a reason, as once you know, you will just say ' oh yes they are far too soft - get some stiffer ones,
and that is fine because I know they are too soft for two up motoring but ideal for just me in the car.
What I wanted was a rough guide to what you all use, 150Lbs plus I am guessing. as that would seem to be a fair rate to start with - mine are less
than that.
Cheers.
EDIT TO ADD
I run Nitrons front and rear, the fronts are perfect, just the rears need sorting.
[Edited on 7/6/12 by Westy1994]
|
|
coyoteboy
|
posted on 7/6/12 at 05:56 PM |
|
|
Well no, you kind of missed my point. Point was that if you change the spring rate you'll change your handling when one-up, you can't get
away from that regardless, so you might as well stick to moving the seats as and when it's needed and keep the handling you like rather than
lose the handling and not have to move seats on the odd occasion.
|
|
Westy1994
|
posted on 7/6/12 at 06:05 PM |
|
|
Ah I see ok, well a bit like my thread on all weather tyres, I am trying to get away from messing with the car everytime I either need to use the car
in the wet or carry passengers, I know that any spring rate change will mess up my solo ride, but there must be a compromise between solo and two up
driving. I am not getting any younger and my times of changing this and that depending on what day it is are coming to an end. I have spent the best
part of 30 years under cars of one sort or another and now just want to jump in and drive the thing for once.
|
|
scoop
|
posted on 7/6/12 at 06:11 PM |
|
|
I ran 9 inch 150lb 1.9"inch springs.
I'm 16 stone and never had to change anything even with passengers.
[Edited on 7/6/12 by scoop]
|
|
JB
|
posted on 16/6/12 at 08:58 AM |
|
|
My thought is that most people run too stiff so will not notice a difference.
I do not think there is any way around your problem. If you optimise for just yourself it will sag too much with a passenger. Get it correct with a
passenger and it will be too hard for just you.
You could compromise with a mid way set up but then it wouldbe a compromise.
|
|
scoop
|
posted on 16/6/12 at 04:51 PM |
|
|
Where hs he gone. On holiday?
|
|