sgraber
|
| posted on 4/9/04 at 09:25 PM |
|
|
USA Builders - Bearing source
This is an FYI
This is a manufacturer of all types of bearings including heim joints. The quality appears to be good and the prices are lower than I have ever seen.
Amazing selection of english and metric sizes.
http://www.vxb.com/miva/merchant.mv
Also, a really good RivNut source
http://sherex.com/index.html
[Edited on 9/4/04 by sgraber]
Steve Graber
http://www.grabercars.com/
"Quickness through lightness"
|
|
|
|
|
turbo time
|
| posted on 4/9/04 at 11:59 PM |
|
|
Strange.....
I'm 100% serious when I say that I came to this site and was going to ask a question about where I could buy a certain type of bearing.....Weird
8).
|
|
|
mangogrooveworkshop
|
| posted on 5/9/04 at 08:35 AM |
|
|
Steve the are the same boys that sell over Ebay. The postage to bligty was twelve dollars for six rodends that came to 14 dollars. Put it this way
the price quoted by a local supplier was 14£ each + 2 quid delivery each.
So VXB could beat a skf supplier four miles up the road with the same product all the way from california. Rip off Britian!!!!!!!!!
|
|
|
sgraber
|
| posted on 5/9/04 at 04:35 PM |
|
|
WELL THEN!
This post is for ALL builders then! 
They Do appear to have an excellent selection of bearings, from the smallest of bearings for slot cars to very large ones - including some bi-axial
thrust bearings that are rated up to 17,000 rpm! Even linear bearings. Plus everything is CHEAP!
Steve Graber
http://www.grabercars.com/
"Quickness through lightness"
|
|
|
