Board logo

Emerald Rolling Road Session
Project7 - 12/3/09 at 08:13 PM

With my SVA rapidly approaching I spent yesterday afternoon at Emerald having the engine mapped.

It made 175.3bhp (the .3 is important ) which I didnt think was bad at all and should see me break the 300bhp/ton barrier.

I cannot reccommend the service highly enough, Dave is very knowledgeable and explained the process to me (most of which I understood!).

Obligatory Photo below
Image deleted by owner

bob tatt - 12/3/09 at 08:21 PM

good figures from a zetec, what induction is that with

Project7 - 12/3/09 at 08:26 PM

Hello Bob,

its got 45mm Jenvey TBs

locosaki - 12/3/09 at 10:32 PM

Yep good power made there,What size of motor is it ?Does it have after market cams etc

Have you any idea what your velocity weighs ?

Did you build trying to keep wait down to a minimum ?

Tidy looking car from your pic on screen,Well done mate.

Mike

stevebubs - 12/3/09 at 11:06 PM

Who made the exhaust?

[Edited on 12/3/09 by stevebubs]

Project7 - 13/3/09 at 09:41 AM

quote:

What size of motor is it ?Does it have after market cams etc

Its a 2.0 Litre, with standard cams. Only mod was ARP rod bolts.


quote:

Have you any idea what your velocity weighs ?

Did you build trying to keep wait down to a minimum ?

I tried to keep the weight down as much as possible, so no windscreen, GRP seats etc. The alloy wheels weighed much more than i thought though so they might get changed soon. Even so I would be disappointed if it weighed more than 550kg.

quote:

Tidy looking car from your pic on screen,Well done mate.

Thanks Mike

quote:

Who made the exhaust?

Hi Steve, The manifold was from Tube Engineers Link and the Can was from Car Builders Solutions.

[Edited on 13/3/09 by Project7]