Gents, can anyone supply me with dimensions for a Velocity rollbar. I would need tube lengths, diameters & wall thicknesses, bend radii & angles and if possible the positioning of the threaded bosses on the four point harness bar and whether or not the boss goes all the way through the cross tube or is a blind fitting. The reason I am asking is that, whilst well aware that I can buy one from Luego I need a taller one than standard as I am taller than standard (6ft 5in) and there is a stock car manufacturing company in my village which can easily knock something like this out. I am also well aware that Luego can supply me with a non stock-size rollbar but it makes more sense to me to get the stock car boys to do it as they are on my doorstep and I have recently done a 'horse trade' with them for some sheets fo stainless so they will allow me some cash off if they make me a rollbar. If not I can use the trade deal for a set of shocks or something. Can anyone oblige?

[Edited on 10/4/04 by Browser]

Buy one from us, it will make you life easier.

Regards The Luego Team.