Board logo

Viento Kit price help
siharrison - 18/7/13 at 11:39 AM

I have found a Viento Chassis (untouched but some surface rust) and all the body panels,
The Seller has asked me to make an offer (which I hate doing) any guidance on what its worth please?
Cheers


nick205 - 18/7/13 at 12:41 PM

Luego's price less 60% as an opening bid.

You may offend, but you can always increase your bid - there's nothing worse than going in too high


siharrison - 18/7/13 at 01:09 PM

Any Idea what there price is please, as there is none on the website!
Thanks


nick205 - 18/7/13 at 01:09 PM

Can't help with that I'm afraid.


Andybarbet - 18/7/13 at 01:12 PM

If I remember correctly I think I paid £1800 for my velocity chassis, powdercoated, fiberglass body panels, pedal box, ali internal panels & stainless external panels.

Personally I think I would go in at £1000 if its chassis & all panels/bodywork, I know the viento was more but cant remember by how much ?

Good luck :-)


siharrison - 18/7/13 at 01:14 PM

Thanks Guys


wilkingj - 20/7/13 at 07:29 PM

8 years ago my Viento chassis, wishbones, hub uprights, and Fibreglass panels, and alloy sides (Budget Blaster) was £2300.

Are the GRP body panels in good condition or faded, as it will affect the value.
If its ALL the chassis, ie bones and uprights, ie a complete chassis, then start at a grand, and work from there.

Lovely car, wish I had not sold mine




rusty nuts - 20/7/13 at 08:26 PM

quote:
Originally posted by wilkingj


Lovely car, wish I had not sold mine





I shan't say I told you so!!!



If the OP buys the kit then make sure you do a search on crush tubes and on the powder coating before building the car

And Geoff, you didn't have ally side panels IIRC

[Edited on 20/7/13 by rusty nuts]


wilkingj - 21/7/13 at 02:56 PM

quote:
Originally posted by rusty nuts
quote:
Originally posted by wilkingj


Lovely car, wish I had not sold mine





I shan't say I told you so!!!



If the OP buys the kit then make sure you do a search on crush tubes and on the powder coating before building the car

And Geoff, you didn't have ally side panels IIRC

[Edited on 20/7/13 by rusty nuts]


Rusty... Your a GIT
I do miss it. But I still get that "Wind in the hair" effect on the Harley.

The £2300 was for Ally side panels. I paid extra on top for the polished Stainless ones. Was about 3 or 400 extra.... NOT cheap.

Geoff...