LocostBuilders - powered by XMB

Luego Viento Panel Sizes

Irony - 11/6/15 at 09:08 AM

I seem to have lost my transmission tunnel footwell aluminium panels. I have moved house in the middle of my build so thats my excuse. Has anyone ever had any panels laser cut or had the drawings for the panels from Luego?

It's a long shot I know but it might save me getting my head down in the footwell with my tape measure.

rusty nuts - 11/6/15 at 11:13 AM

Can't help with any panel sizes but you did fit the drivers side front tunnel panel before fitting the pedal box??

Irony - 11/6/15 at 11:59 AM

quote:
Originally posted by rusty nuts
Can't help with any panel sizes but you did fit the drivers side front tunnel panel before fitting the pedal box??

Everything on the car is more or less finished now. The drivers side tunnel is not fitted and the pedal box is fitted. I guess you are going to tell me its impossible or very difficult to fit with the pedal box in place. I bought the car part built and I managed to get the panel off with the pedal box in place so I was hoping I would be able to do it in reverse.

BigFaceDave - 11/6/15 at 12:06 PM

I think I have some of panels for mine and not fitted any yet. Next time im at my workshop I'll have a rummage and see what I've got and have a measure up if needed.