Hi everyone,

Does anyone have a complete build manual for a Luego Velocity XT? I have a hard copy which the original owner gave me when I bought the car, but I've just realised that some sections are missing. Any help gratefully appreciated.

Cheers,

Pete

Think I have a PDFs version, send me your email as msg and will have a look when I get home mid week

email sent its about 14mb and in word format.

hope it helps

Hi Matt,

Yes all sorted and printed thanks. Great to have such a useful forum and helpful contributors. Thanks again.

Pete

Good news, if you want any pics or specs of mine to give inspiration let me know

Hi matt5964,

Any chance that you still have a copy of the Luego Velocity XT build manual.

I purchased my kit years ago, and with a lot gone on with family etc. it got put on the back burner but now is the time to finish the old girl off.

Cheers

If not, I think I have one somewhere, I will take a look this afternoon, if I find it I can email across to you

Cheers Andy

Not a problem I still have it u2u me your email

I'm away with work back home saturday if it can wait

If it's any help I have a Luego Lowcost which is very similar in Great Shelford if you need to check anything. Make sure you read about the crush tube and also the powder coating before building the car, it could save you loads of grief.
Is this the kit in Kinges Hedges Rd?

[Edited on 18/1/17 by rusty nuts]

OK, my afternoon at work got a tad crazy, I will check tomorrow for you.

I'm Sure I saved a copy on our work server - just incase :-)

Another couple of things to sort out, the steering column bush , there's a self aligning bearing that improves things. The rear suspension uprights on my car both bent resulting in strange handling, I straightened them out and welded on some reinforcing bands , been OK for the last 8 years. Both of these items have been covered in this section of the forum

Rusty Nuts
No its not the kit in King Hedges.
I got this kit years ago from the original guys when Luego was based in Peterborough and had to put it on hold due to family commitments/new house/life lol
Now its time to get the old girl finished.

I got my kit from Peterborough too, sounds like life got in the way of your build too.

I ended up in a messy divorce, lost my house, the kit went into storage, I almost lost it in the divorce too, it's taken me 10 years to get back to the point where I could afford to buy another house & finally got my own garage again.

Hopefully I can get building sometime soon once the house is a bit more liveable. We've only been here 8 weeks so still getting sorted out.

Make sure you put some pictures in your archive, I would be interested to see it.

I have found the build manual, if you send me a U2U with an email address i will forward it on for you.

Hi folks, new here and was hoping someone may still have the manual floating around in pdf format they could share with me?
Thanks!

U2U sent, I have shared a link to the PDF and the CD that Luego gave buyers.

Cheers,
Dan

Everything I collected over the years for my build. Including pics of the long gone Leugo Viento demonstrator............

Rinky Dink Link to Wetransfer

Hi,fairly new Luego owner here. Although my car is fully build i was hoping someone still had some of these build manuals as they might come in handy with repairs and maintenance ?
Cheers