Need above, but it needs to be very short, any ideas?

Buy long one and cut it down?

brake/accelerator cables fron go-karts seem quite useful. i'm pretty sure you could also shorten them more if you had to. look at the ones that zip karts use

quote:

---

Originally posted by andyharding
Buy long one and cut it down?

---

they are expensive, but, renault/citreon/peugeot throttle cable kits have multiple end fittings, teflon liners & you trim to fit.

What about a halfords bike brake cable?

I got mine from tescos from the bike section £1.98 1.5m in length perfick

Vehicle Wiring Products do make your own cable parts in their motorcycle section. I have used the size 5 for my handbrake. I lttle blat with the welder can put a useful blob on the end of the cable if you don't fancy soldering nipples on.

Caber

Little tip for cutting the bowden cable , use a sharp chisel , lay the cable on a block of metal and give the chisel one sharp tap with a hammer . Cutting with pliers etc often caues the cable to unwind.