Can anyone tell me the length of the prop i need...

I have a zetec ( not really important ) mated to an MT75 which is bolted on using the standard ford gearbox mount to the standard velocity chassis mount.

at the other end im running a 7inch DIF also mounted on the standard velocity mounts...

so,,,,,

anyone tell me what length i need?

Ian

[Edited on 10/8/07 by saigonij]

I would measure it myself when everything is in place, just to be on the safe side.

And then order it at Baily Morris, i believe that they have a drawing of a propshaft where you can put the dimensions in.

You could also look at the post below of a propshaft for a Velocity for sale.

Sebastian.

the post for sale is for a type 9 box not an mt75

You will have to measure your set up as all the builds are different. I saw the one advertised & thought yep that would do, BUT, when I measured my car I found that the I needed one that was 635mm. So 690 was toooooo long.
Some how I have managed to get my gearbox about 3 inches further back than most people.

Enjoy.