i am trying to set up the velocity and would like some guidance on initial settings for ride height etc. Could someone give me an account of how to set this up. Where do i measure the ride height from.
I am afraid to say that I just did the nuts up on the shocks so that there was some tension there and stuck them on. I never measured it. In fact I
never measured anything, the tracking, caster, camber etc. I always planned to go and get the whole lot set up professionally but it still drives
fantastically. I did 300 miles at the weekend and it handled like a dream. So basically I am no help, can't even think why I bothered to
reply.
Good luck.
Steve
Don't know if it was correct but when I set mine up I measured from the chassis below the wishbone mounting brackets for the front and rear suspension . After it had been on the road for a year or so I set it up using a corner weight gauge which made a noticeable difference
quote:
Originally posted by Steve Lovelock
I am afraid to say that I just did the nuts up on the shocks so that there was some tension there and stuck them on. I never measured it. In fact I never measured anything, the tracking, caster, camber etc. I always planned to go and get the whole lot set up professionally but it still drives fantastically. I did 300 miles at the weekend and it handled like a dream. So basically I am no help, can't even think why I bothered to reply.
Good luck.
Steve