Pair of Austin Princess 4 Pot Calipers for sale
These will mount to a cortina spec upright and run with a solid disc
Recently taken off my Westfield Megablade trackcar, only replacing because I inherited some Wilwoods, they are in full working order but could do with
a paint if you are bothered about cosmetics.
Come with braided brake lines - (Dual lines per caliper in case of failure of one brake line)
I will leave the pads in there as they still have some life left.
Don`t come with M12 bolts to mount to upright.
£55 ono + P&P
or can be collected from B16 8TP
Any questions drop me a U2U
these only do solid discs
are spacer kits still available ?
just checked my old discs and they are vented so the calipers must have a spacer kit already installed.....doh!
Old Discs ( see below )
[Edited on 21/3/10 by Tartanpimpernel]
[Edited on 21/3/10 by Tartanpimpernel]
Are theyali alloy?
Daren
what thickness are your discs ?
i'll have them. u2u me your details.
cheers
apologies for the delay in replying to the thread I went out after I updated it and missed all new posts & u2u`s
calipers are provisionally sold from a u2u i received at 5pm, should this change deltron is next in line going chronologically off the posts/u2u`s
*THESE ARE NOW SOLD*
thanks
-c-
[Edited on 23/3/10 by Tartanpimpernel]