For Sale - Procomp LA Gold with roll cage and V5 present
welderman - 24/9/13 at 01:25 PM
For Sale - Procomp LA Gold with roll cage and V5 present
With too many work and family commitments (new baby) it time to sell the procomp, this car was fully stripped and rebuilt to a very high standard.
Car is registerd on a Q plate and has a 10 months MOT and 5 months tax.
Engine and Drivetrain
1996 Fireblade carb’d engine - standard internals, retarded ignition, AB Performance Baffle plate
Barnett uprated clutch springs
td04-16t turbo, mb customs stripped and serviced before installation
Cometic 1.7mm thick head Gasket
One off exhaust and plenum, with charge cooler.
Carbon fiber nose cone.
Carbon fiber side panels
Carbon fiber front and rear arches.
Alloy rear panel.
Alloy bonnet
LED rear light.
LED indicators.
Newly Powdercoated Front Wishbones.
Newly Painted Uprights / Hubs (new bearings).
Newly Powdercoated Wing Stays.
Tec-Rac Steering Rack.
Lower Steering Column.
Sierra Upper Steering Column with QR Splined Slug.
Suede Steering Wheel with SPA QR Hub.
Kilcktronic paddle gear change with flaps on the steering wheel.
Escort Axle with Diff and Shafts.
Rear Linkages / Panhard.
Shocks Springs.
Ali Fuel Tank.
Caterham Race Ali Rad.
Pair of Sabelt 4-Point Harnesses.
Front Rear Brake Discs on Ali Bells.
Alcon CLH304/25-38 Front Calipers.
Alcon CLR280/11-35 Rear Calipers.
Alcon Front / Rear Brake Cylinders.
Pedal Set (with bias bar).
Caterham 13x6 R400 wheels with avon tyres
Lots of rebuild pictures on request (but there are hundreds)
Priced to sell at £ 6500.00 ono
Any questions please ask and i will try to answer then as soon as i can.
Viewings welcome.
Joe
done
Done.
Done..
Done...
Done.....
Done......
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
me! - 24/9/13 at 01:54 PM
That's a bargain!
welderman - 24/9/13 at 03:41 PM
quote:
Originally posted by me!
That's a bargain!
Locost bargin
bi22le - 24/9/13 at 04:33 PM
Kinda tempted to sell mine and buy yours!!
May I ask what make shocks and springs. Also total chassis weight. Also power output of engine.
welderman - 25/9/13 at 07:47 AM
quote:
Originally posted by bi22le
Kinda tempted to sell mine and buy yours!!
May I ask what make shocks and springs. Also total chassis weight. Also power output of engine.
Rear shocks are AVO, fronts not sure as stickers have come off.
Power - not sure as not been on rolling road yet, but I would estimate approx. 180 ish
Car weighs in at 430 kg with half tank fuel.
daveb666 - 25/9/13 at 07:53 AM
That is cheep cheep!
May I ask who did your cage?
PS. Love the garage ramp too.
[Edited on 25/9/13 by daveb666]
welderman - 25/9/13 at 08:43 AM
quote:
Originally posted by daveb666
That is cheep cheep!
May I ask who did your cage?
PS. Love the garage ramp too.
[Edited on 25/9/13 by daveb666]
im thinking it priced to low 
cage was already on the car so not sure, but the car was used for hill and sprints when it was originally built.
The brakes are fookin mahusive
loggyboy - 25/9/13 at 08:50 AM
quote:
Originally posted by daveb666
That is cheep cheep!
May I ask who did your cage?
PS. Love the garage ramp too.
[Edited on 25/9/13 by daveb666]
Cage looks like a Procomp standard item - for want of better words its 'type approved' rather than to 'MSA blue book spec' hence
the skinnier pipes as its all be tested and proved to work.
welderman - 1/10/13 at 06:58 AM
bit of interest but nothing promising, don't want to put it on ebay yet. Still for sale fellow locosters.
Might give Piston Heads a go next.
The Knobs - 1/10/13 at 10:25 PM
What weight is the car, and is the engine running as it should be ?
welderman - 1/10/13 at 11:03 PM
Car weighs in at 430 kg
All running ok at the moment
Tommy P - 3/10/13 at 02:19 PM
YO Joe just noticed the pro comp turbo blade nutter b****rd is for sale!!
That's too cheap for something put together so well and full of carbon!!
Get it put on pistonheads for at least 8-9K, with a warning sign about it's pace!!!
Good luck with the sale.
welderman - 8/10/13 at 07:29 AM
Any more interest fellow locosters. May P/X with a classic mini if any ones interested
welderman - 14/10/13 at 01:23 PM
bumpy bump,
welderman - 28/10/13 at 09:27 AM
May even split if I can get enough interest in the parts, sad I know but its just sat there not being used 
welderman - 8/11/13 at 10:49 AM
Sorry fellas this is still for sale if any body is interested.
I think its a fair price but might be wrong, although its the wrong time of year.
welderman - 13/2/14 at 01:36 PM
Quick update. This car is now sold.
