Hi all,
Has any got any Sierra rear hubs, to go with a 7.5" diff and 105mm shafts?
I'm not bothered about the brake discs and calipers, but they're there, I'll have them if the price is right.
Cheers Frank.
do you mean the 108mm CV joints ?
Bugger!!
Yes, I mean 108mm!!
as far as I'm aware the 108mm CV's are only used on the 2wd Sierra Cossie
(these also have lugs to suit 273mm discs - which can be an issue for smaller wheels)
all the other sierra's, Granada's and Scorpio's used the 100mm CV's - so it limits you choice a bit
one other possibility is the BMW 3/5 series - lots of them use 108mm lobros...
Yes, it's a cosworth diff and shafts that I've got.
Do the BMW hub carriers bolt onto the swing arms, like the Sierra?
I thought the bearings were pressed into end of the arm on the BMW.
quote:
Originally posted by fha772
I thought the bearings were pressed into end of the arm on the BMW.
I have some 108mm stub shafts here if that's what your after as funnily enough I need the smaller 100mm type