Numb nuts
|
| posted on 9/1/09 at 03:39 PM |
|
|
Clutch cable
What clutch cable is used with the Velocity XT using a type 9 box?
Went for a blat today and it snapped where its fixed through the pinch bolt at the pedal  Things never go wrong on the drive or close to home
|
|
|
|
|
rusty nuts
|
| posted on 9/1/09 at 06:54 PM |
|
|
I used a mk2 Escort one on my locost which works fine . You can check the length of your cable and look at Burtonpower catalogue to see which you
have . When fitting DO NOT overtighten the pivot bolt.
|
|
|
Numb nuts
|
| posted on 9/1/09 at 07:31 PM |
|
|
Thanks for this  
I assume you are talking about over tightening the pinch bolt? 
Cheers Steve
|
|
|
rusty nuts
|
| posted on 9/1/09 at 08:43 PM |
|
|
Yes , I used 2 nuts locked together after taking up the slack in the bolt. Might also be worth checking the cable has a straight run from the bulkhead
to the pivot point?
|
|
|
.jpg)
