simonk
|
| posted on 15/4/09 at 03:19 PM |
|
|
Viento Screen and Wipers
Does anyone have a good shot of their screen and wipers mounted - I'm keen to get some guidance of screen / wiper spindle / wiper arms and
blades positioning. If so can you please point me at where in your archive or U2U me
Thanks all
Simon
|
|
|
|
|
jollygreengiant
|
| posted on 17/4/09 at 09:01 AM |
|
|
I think snuggs is probably about the only Viento with a screen and wipers. Best give a nudge or a U2U.
Hope this helps.
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
rusty nuts
|
| posted on 17/4/09 at 07:43 PM |
|
|
Might be worth having a look at some of the photos taken at Stoneleigh and Newark shows ? IIRC there was a load at Newark last yearbut as Clive says
the only Viento with a screen that I can remember is Clive's (snuggs) But he lost his wiper when we went into Newark for food, it sort of fell
off!
|
|
|
hector
|
| posted on 17/4/09 at 09:14 PM |
|
|
Hi all
My Viento has screen and wipers fitted, I basically ignored the instructions in the build manual as their dimensions didnt seem to tally with the
scuttle (maybe it was general instructions for locost/velocity)??
anyway i used the shortened mini arms and mounted the motor in behind the dash above steering column.
Will take some pics this weekend and post in my photos archive, luckily i have the dash out at moment as i have just fitted me turbo boost gauge!!
should be firing the beast up on sunday and seeing hows it runs with an extra load of HP
cheers colin
|
|
|
.jpg)
