Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Problem day
jollygreengiant

posted on 29/6/09 at 09:08 PM Reply With Quote
Problem day

Well took the car out to go up for my hackney carriage medical today (£110 pre paid to quacks when you book it).

On the way up the throttle linkage came off the butterfly spindle. Common problem on the Ford Sierra EFI, but easily fixed.

Had medical, came out to car and ............................................................................................................
Whats black and drips from the bottom of the engine, leaving a pool of shinny black stuff about 2 foot in diameter.????

Hey ho engine out.





Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.

View User's Profile View All Posts By User U2U Member
tomgregory2000

posted on 29/6/09 at 09:17 PM Reply With Quote
quote:

Hey ho engine out.


To put a bigger one in

View User's Profile View All Posts By User U2U Member
NeilP

posted on 29/6/09 at 09:18 PM Reply With Quote
Pinto Shminto - Time to up the bores me hearty!





If you pay peanuts...
Mentale, yar? Yar, mentale!
Drive it like you stole it!

View User's Profile View All Posts By User U2U Member
DavidM

posted on 29/6/09 at 09:19 PM Reply With Quote
Sorry to hear that Clive. Where is it coming from? Is it a seal or have you broken something?

David





Proportion is Everything

View User's Profile View All Posts By User U2U Member
graememk

posted on 29/6/09 at 09:31 PM Reply With Quote
"hazmat" hope you cleaned up the oil
View User's Profile Visit User's Homepage View All Posts By User U2U Member
jollygreengiant

posted on 29/6/09 at 09:54 PM Reply With Quote
quote:
Originally posted by DavidM
Sorry to hear that Clive. Where is it coming from? Is it a seal or have you broken something?

David


Looks like from the bottom off the sump below the drain nut, will know more tomorrow after jacking up wiping & inspecting. I suspect that it is from that little divot just below the nut where on occasions I have had ground clearance 'issues'.





Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.

View User's Profile View All Posts By User U2U Member
blakep82

posted on 29/6/09 at 10:10 PM Reply With Quote
quote:
Originally posted by jollygreengiant

Whats black and drips from...


thought this was the start of a joke about traffic wardens. the uniform's black isn't it? don't know what drips from them right enough. smugness i guess





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
jollygreengiant

posted on 4/7/09 at 11:49 AM Reply With Quote
Ok, so now I've had time to stop panicing and actually think and do something about this.
Car is now up on axle stands again, so an ideal opportunity to do the springs and wishbone bushes while I sort out the sump.

Inspection shows that the sump actually sits about an inch plus below the bell housing. Driving the car has modified the bottom of the sum and hence holed it (pin hole) just below the drain plug. So this looks like it is also an ideal opportunity to modify the sump. This (in conjuction with new rear springs and hence slightly higher ride height) should solve the ground clearance and scraping sump problem.

When I originally said engine out I was still thinking in terms Sierra/Granada engine. Idiot. The sump access is a doddle as it now drops straight out the bottom (NO CROSS MEMBER to get in the way is there).

All being well I should be back on the road next weekend(ish).





Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.

View User's Profile View All Posts By User U2U Member
Browser

posted on 14/7/09 at 04:47 PM Reply With Quote
quote:
Originally posted by jollygreengiantWhen I originally said engine out I was still thinking in terms Sierra/Granada engine. Idiot. The sump access is a doddle as it now drops straight out the bottom (NO CROSS MEMBER to get in the way is there).


Well, I was wondering, but since you've had the good grace to call yourself and idiot.........
Hope it gets sorted soon mate.






View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.