Mday41
|
| posted on 28/3/11 at 09:44 PM |
|
|
mx5 rollbar?
does any1 have a clue if a mx5 rollbar will fit and be ok for iva?
m.day
|
|
|
|
|
dave-69isit
|
 posted on 28/3/11 at 10:38 PM |
|
|
roll bar
how wide is it at its widest point sure u need about 44 inch at widest point do u have a roadster manual should have mesurments in it
|
|
|
ashg
|
| posted on 29/3/11 at 12:11 AM |
|
|
you don't need a roll bar for iva
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
|
Daddylonglegs
|
| posted on 29/3/11 at 07:23 AM |
|
|
I used one for my 442, but had to make it narrower. I cut out the required section, placed a tube inside about 2' long, plug welded and seam
welded it in place and job's a good 'n  . So for a standard sevenesque-type chassis I would say it will be waaaay too wide (the 442 is
4" wider than a standard Locost).
HTH
It looks like the Midget is winning at the moment......
|
|
|
Mday41
|
| posted on 29/3/11 at 09:11 AM |
|
|
thanks guys will have a measure up just like the look of the mx5 rollbar. didnt no you didnt have to have one tho!!
m.day
|
|
|
